Kaiser HGG 60511N [6/84] Installation

INSTALLATION INSTRUCTIONS

INSTALLATION

Unhampered access to all control units as well as

duly ventilation of the kitchen are primary

installation requirements.

Before using your new appliance, make sure to fit

it properly. By fixing the adjustable feet in a proper

position, you can keep the upper surface strictly

horizontally and, thus, avoid backlash. For this

purpose, take out the drawer at the bottom.

The cooker is intended to be build up into kitchen

furniture, however, only up to the height of the

working plate, i.e. fixing up higher than 850 mm

from the floor level is unreasonable.

All materials used for furniture panels should be

heat resistant at the temperature 100°C minimum.

Breach of this regulation can result in distortion or

ungluing of panel coverings. To avoid heat

distortion of the furniture panels, ensure that the

space between the contact surfaces is not less

than 2 cm.

Please mount the fume extractor hood at about

600-700 mm above the cooking surface (see

installation instructions for your fume extractor

hood).

3,5 kWt gas cookers are provided with a

connecting cable (cross-section – 3 x 1,5 mm

length – approx. 1,5 m) and a plug equipped with a

safety stud.

Make sure that the AC outlet is isolated and not

placed above the cooker.

After the cooker has been installed, check up if the

electrical outlet is easy to access.