Scoole SC HT HL1 2000 BE [3/44] Electric heater of convection type

3

1. Read all instructions prior to operation of the heater.

2. When the heater is operating it heats up to a very high temperature. To prevent burns, do not touch hot

surfaces of the unit by hands or other parts of the body.

3. The unit must be placed away from flammable and easily deformable objects.

4. Make sure that the unit's case and the heating element cooled down prior to the unit is dismantled and

packed for long-term storage.

5. When the unit is not operated for a long time, store it factory-packaged in a dry and cool place.

6. DO NOT COVER THE UNIT when it is operated. Do not dry clothes and any other fabrics and

9. The unit is equipped with a European-standard plug with a ground pin. The plug must match the

European-standard outlet and enter it without any effort. If the plug doesn't enter the outlet or enters it

too tightly, turn the plug vertically 180° and try again. If you still cannot plug it then you need to call for an

electrician to replace the electric outlet. Never use the unit if the plug is not fully connected to the outlet.

10. Do not connect the unit to the mains if its surface is damp (wet).

11. Never use the unit in a situation when it may contact water.

12. When the unit is switched on and operating, do not touch its surface and the surface of the control

block by wet hands and any parts of the body.

13. Do not switch on the heater if its power cord or plug is damaged. To prevent electric shock, the

damaged power cord must be repaired only in authorized service centers of the manufacturer and by