![Makita 6413 [4/8] Operating instructions](/img/pdf.png)
Makita 6413 [4/8] Operating instructions
![Makita 6413 [4/8] Operating instructions](/views2/1175217/page4/bg4.png)
4
7. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
8. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
OPERATING INSTRUCTIONS
Installing or removing drill bit
CAUTION:
• Always be sure that the tool is switched off and
unplugged before installing or removing the bit.
For 6411,6412
1
007897
To install the bit, place it in the chuck as far as it will go.
Tighten the chuck by hand. Place the chuck key in each
of the three holes and tighten clockwise. Be sure to
tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclockwise
in just one hole, then loosen the chuck by hand.
For 6413
1
2
007898
Hold the ring and turn the sleeve counterclockwise to
open the chuck jaws. Place the bit in the chuck as far as
it will go. Hold the ring firmly and turn the sleeve
clockwise to tighten the chuck.
To remove the bit, hold the ring and turn the sleeve
counterclockwise.
Switch action
1
2
007895
CAUTION:
• Before plugging in the tool, always check to see
the switch trigger actuates properly and returns to
the "OFF" position when released.
For 6411
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For 6412, 6413
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
Reversing switch action
For 6412, 6413
1
A
B
007896
This tool has a reversing switch to change the direction
of rotation. Move the reversing switch lever to
the
position (A side) for clockwise rotation or
the
position (B side) for counterclockwise rotation.
1. Reversing
switch lever
1. Switch trigger
2. Lock button
1. Ring
2. Sleeve
1. Chuck key
Содержание
- 6412 6413 1
- Instruction manual 1
- General power tool safety warnings 2
- Save all warnings and instructions for future reference 2
- Specifications 2
- Symbols 2
- Drill safety warnings 3
- Installing or removing drill bit 4
- Operating instructions 4
- Reversing switch action 4
- Save these instructions 4
- Switch action 4
- Warning 4
- Accessories 5
- Drilling operation 5
- Maintenance 5
- Makita corporation 8
Похожие устройства
- ШТРИХ–М ШТРИХ-МИНИ-ФР-К Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Инструкция по эксплуатации
- Makita 5008mg Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Руководство налогового инспектора
- ШТРИХ–М ШТРИХ-ФР-К Руководство программиста
- Makita ga5021c Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Ремонтная документация
- ШТРИХ–М ШТРИХ-ФР-К OPOS Драйвер 1.7.10
- Makita ga4530 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Ремонтная документация
- Makita hr2600 Инструкция по эксплуатации
- Makita hr1830 Инструкция по эксплуатации
- Makita td0101 Инструкция по эксплуатации
- Makita hp1631 Инструкция по эксплуатации
- Makita uh4861 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-950К Инструкция по эксплуатации
- ШТРИХ–М Retail-01K Инструкция по эксплуатации
- Makita uh4261 Инструкция по эксплуатации
- ШТРИХ–М Retail-01K Ремонтная документация
Скачать
Случайные обсуждения