Nokia bh-112u с кабелем ca-190 black, черный [4/9] Switch the headset on or off

Warning:

Use only chargers approved by Nokia for use with this particular model. The use of any

other types may invalidate any approval or warranty, and may be dangerous. Use of

unapproved chargers may present a risk of fire, explosion, or other hazard.

1 Connect the USB cable to the USB connector of the charger. Connect the charger

to a wall outlet.

2 Connect the charger cable to the charger connector on the headset. The red indicator

light turns green when the battery is fully charged.

3 Disconnect the charger from the headset, then from the wall outlet.

When you unplug a charger, hold and pull the plug, not the cord.

The fully charged battery has power for up to 5 hours of talk time or up to 150 hours of

standby time.

When the battery charge is low, you hear a voice prompt, the headset beeps every 5

minutes, and the red indicator light flashes. When the battery is charging, the red

indicator light is on.

Check the battery charge

Make sure the headset is switched on, and press

. A green light indicates a sufficient

charge level. If the light is yellow, you may need to recharge the battery soon. If the

light is red, recharge the battery.

Switch the headset on or off

Switch on

Press and hold

for 2 seconds. The headset beeps, and a green indicator light flashes

once.

The headset connects to the last connected device. If you have never paired the headset

with a device, or you have cleared the device pairings, pairing mode is activated.

Switch off

Press and hold

for 2 seconds. The headset beeps, and a red indicator light flashes

once. All active calls are ended.

If not connected to a device within 30 minutes, the headset switches off.

Pair and connect the headset to your phone

Before using the headset, you must pair and connect it to a compatible phone.