Home
Главная
Scarlett
Напольный Вентилятор
SC - 174 (черный)
Инструкция по эксплуатации Страница: 3

Scarlett SC - 174 (черный) [3/10] Gb instruction manual

IM001

www.scarlett.ru SC-174

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

• Please read this instruction manual carefully before use and keep in a safe place for future reference. Incorrect

operation and improper handling can lead to malfunction of the appliance and injuries to the user.

• Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains

voltage in your home. For home use only. Do not use for industrial purposes. Do not use the appliance for any other

purposes than described in this instruction manual. Do not use outdoors.Always unplug the appliance from the

power supply before cleaning and when not in use. To prevent risk of electric shock and fire, do not immerse the

appliance in water or in any other liquids. If it was happened DO NOT TOUCH the appliance, unplug it immediately

and check in service center.

• Do not take this product into a bathroom or use near water. Do not place appliance or parts near an open flame,

cooking or other heating appliances. To reduce the risks of electric shock do not switch the appliance by wet hands.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning

use of the appliances by a person responsible for their safety. Children should be supervised to ensure that they do

not play with the appliance.

• Do not leave the appliance switched on when not in use. Do not use other attachments than those supplied. Do not

attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the

nearest service center only. Do not operate after malfunction or cord damage. Keep the cord away from sharp edges

and hot surfaces. Do not pull, twist, or wrap the power cord around appliance.

• Never insert fingers, pencils or any other object thorough the guard when the fan is operating. Do not operate

without fan grill properly installed.

ASSEMBLY INSTRUCTIONS

• For packaging reasons the fan was delivered unassembled. Check all parts are available and not damaged. Do not

connect the fan to the mains supply before you have completely finished the assembly. Fasten the base tube to the

base with screws (included). Remove the yoke from the base tube and slide the base cover to the bottom of the

tube. With the extension pole set to the desired length, refit the yoke and tighten. Assemble the motor and switch

box onto the extension pole and tighten screw B.

• Unscrew the spinner clockwise and the nut counterclockwise, and then remove both of them from the motor shaft.

Assemble the rear guard in correct position with the handle on. Screw on the plastic nut to secure the rear guard in

place. Assemble the blade to the motor shaft until it reaches the retaining washer. Tighten the spinner

counterclockwise to secure the blades. Assemble the front guard with the logotype correctly orientated and fix both

guard together with the clips/hoop around the edges. Fix the vertical draft of stand fan with the screw. The fan is

ready for operating.

HOW TO USE

NOTE: Do not use the fan in wet conditions in order to avoid electrical shocks.

• Always place the fan on a dry and even surface. On the motor housing you will find knob to activate the swiveling of

the fan. If you press the knob, the swiveling is activated. If you pull the knob, the swiveling will stop. There is a stand

fan control panel on the switch box.

BUTTONS:

• On / Speed – on button/rotation speed switch button;

• Off – fan off;

• Mode – touch this button repeatedly, the wind will recycle along NORMAL – WIND – SLEEP.

– Normal – means the airflow of constant intensity;

– Wind – means the intense undulating variation of airflow;

– Sleep

– means the undulating variation of airflow;

• Time – touch this button repeatedly, timing time will be half an hour as step-by-step unit. Total 15 steps; the longest

time is 7.5 hours. For example, if the set timing time is 5.5 hours, you may touch the button repeatedly for eleven

times and make the pilot lamp of showing 0.5, 1 and 4 hours. This means 0.5+1+4=5.5 hours.

INDICATOR LIGHTS:

• 0,5h...4h – switching off time;

• H – Maximum speed rotation;

• M – medium speed rotation;

• L – minimum speed rotation;

• SLP (Sleep) – Sleeping wind;

• RHY (Natural) – Natural wind;

REMOTE CONTROL

• It is possible to control and adjust the stand fan by using both control panel buttons and remote control:

– On / Speed – on button/ rotation speed switch button;

– Off – “Off “button;

– Mode – you can choose any mode among: NORMAL-NATURAL-SLEEP;

– Time – sets operation time. When the time is expired, the stand fan switches off automatically.

NOTE: Batteries are not included.

CARE AND CLEANING

• Remove the plug from the power supply before carrying out any cleaning. Never use abrasive cleaners. Clean the

guard, blades, base tube and base with a damp cloth or sponge, then wipe with dry cloth.

STORAGE

• Keep the appliance at normal conditions in dry room.

Scarlett SC - 174 (черный) [3/10] Gb instruction manual

Содержание

Похожие устройства