Remington hc5880 [7/136] English

• Oncethebladesetisfullydried,toenhanceperformanceandprolongthe

life of your clipper, we strongly recommend for you to oil the blades. To be

properly oiled, the blade set needs to be removed, so drops of oil can be

added to the back gliding surface.

, EVERY SIX MONTHS

• Atregularintervalsthebladesetshouldberemovedandcleaned.

• Removethe2screwsretainingthexedbladewithahexscrewdriver.Donot

remove blade set.

• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donot

remove the lubricating grease on the plastic components. It is not necessary

to remove the small moving blade from the unit.

• Takeoutthehexscrewsanddisassemblethebladeset.Brushandcleanout

accumulated hair. Oil the contact surfaces of the blades and then

reassemble.

• Ifthebladesarenotcorrectlyaligned,cuttingeciencywillbeimpaired.

• Placeafewdropsofclipperoilontothebladesglidingsurface.Wipeo

excess oil.

C CLEANING CAUTIONS

• Ensuretheapplianceisswitchedoandunplugfromthemainoutletbefore

cleaning

• Onlytheattachmentguidecombsandbladesetmayberemovedfromthe

product for cleaning.

• Donotuseharshorcorrosivecleanersontheunitsortheirblades.

• Suitableforcleaningunderanopenwatertap

BATTERY REMOVAL

• Thebatterymustberemovedfromtheappliancebeforeitisscrapped.

• Theappliancemustbedisconnectedfromthesupplymainswhenremoving

the battery.

• Ensurethattheclipperisdischargedofallpoweranddisconnectedfromthe

mains

• Liftorprythedecoplateonthelowerportionoftheclipperandunscrew2

screws located on the back housing of the clipper.

• Remove4screwsofinnerhousingtoexposebatteries

• Liftorprythecoverplateonthebottomofthebatterychamber.

• Removethe2batteriesandprintedcircuitboardassemblyfromthebattery

chamber.

ENGLISH

GBDNLFEIDKSFINPSKCZ

HUN

PLRUTRROGRSL

AE HR