Remington hc5600 [8/168] English

• Pushthebuttonthatislocatedonthefrontofthehairclipper.Thebladeswill

slide out and the blade set can be easily cleaned under the tap.

• Oncethebladesarecleanedthebladesarelockedintoplacebypushingthe

blade set towards the hair clipper head and will snap into place.

• Donotruntheentireunitunderthetap,onlythebladesetismeanttobe

submerged in water.

Note: Ensure the clipper is turned o when cleaning.

, EVERY SIX MONTHS

• Atregularintervalsthebladesetshouldberemovedandcleaned.

• Removethe2screwsretainingthexedbladewithascrewdriver.Donot

remove blade set.

• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donot

remove the lubricating grease from the blades. It is not necessary to remove the

small moving blade from the unit.

• Ifthemovingbladehasbeenremovedthiscanbere-ttedbyslottingthe

coated blade holder over the pin in the centre of the interior product head. The

groove on the coated blade, just below the teeth, rests on a metal plate at the

 oppositesidetothescrewholes.Thexedbladeisttedwiththeraisedprole

 pointingoutwardsandxedwiththe2screws.

• Notethatifthebladesarenotcorrectlyalignedthencuttingeciencywillbe

impaired.

• Placeafewdropsofcutterorsewingmachineoilontotheblades.Wipeo

excess oil.

, CLEANING CAUTIONS

• Ensuretheapplianceisswitchedoandunplugfromthemainoutletbefore

cleaning.

• Onlytheattachmentguidecombsandtrimmerblademayberemovedfrom

the product for cleaning.

• Cleaningshouldbedonewithasoftbrush,suchasthebrushsuppliedwiththe

product.

• Donotrinseunderwater.

• Donotuseharshorcorrosivecleanersontheunitsortheirblades.

ENGLISH