Polaris GAMMA 3.5 Инструкция по эксплуатации онлайн [20/23] 19396

water tap located at the heater's inlet; more "holes" can be

opened in the shower head to let more water pass through.

 The filter located at the inlet to the heater should also be

cleaned.

The water is very cold. The water temperature can be increased at the outlet by one

of the following actions:

 the water temperature can be raised by pressing one of the

"supply choice buttons", going from a minimal supply to a

higher level;

 the water-flow can also be decreased by means of the

water tap located at the heater's inlet;

 fewer "holes" can be left open in the shower head to let

less water pass through

The water is spraying out of

the shower head too

slowly and/or in the

wrong direction (not

into the shower).

The "holes" in the shower head must be cleaned.

VII. Unit cleaning

 Before cleaning, unplug the unit.

 Wipe it with soft wet cloth. Don’t use solvents or abrasives.

 Don’t scrape the body with hard instruments.

VIII. Specifications

Voltage 220 V

Input current 16А

Type of input alternating

Power 3.5 kW

Power consumption 3.5 kW/h

Protection class 1

Protection degree IPX4

Maximum/Minimum water pressure 6/0,2 бар.

Water flow 2.4 l/min.

Dimensions: 16 x 29 x 10 cm