Home
Главная
Polaris
Электрический Проточный Водонагреватель
GAMMA 7
Инструкция по эксплуатации Страница: 20

Polaris GAMMA 7 Инструкция по эксплуатации онлайн [20/24] 19410

Problem Reason and solving method

When the water is very hot,

but only for a short

time, and then the

water becomes very

hot again briefly but

for a short time also.

It means that the heater has been installed incorrectly and

that the outlet is being obstructed by some tap or other

object. The tap must be located at the inlet of the heater!

Use only the parts supplied with the heater at the outlet!

The heater heated the water

as expected, but only

for a short time and

not again.

The protective fuse blew out, because it was unsuited to the

power of the heater installed.

The heater is not heating. Check to be sure that only parts supplied with the heater are

attached at the outlet! Make sure that the tap at the inlet

is a regular one, not a brass ball faucet/level tap, so that

the water flow can be finely controlled.

Common malfunctions that occur after prolonged, normal use of the heater

The water is very hot The water temperature can be reduced at the outlet by one of

the following actions:

 the water temperature can be lowered by pressing one of

the "supply choice buttons", going from a maximum supply

to a lower level;

 the water-flow can also be increased by means of the

water tap located at the heater's inlet; more "holes" can be

opened in the shower head to let more water pass through.

 The filter located at the inlet to the heater should also be

cleaned.

The water is very cold. The water temperature can be increased at the outlet by one

of the following actions:

 the water temperature can be raised by pressing one of the

"supply choice buttons", going from a minimal supply to a

higher level;

 the water-flow can also be decreased by means of the

water tap located at the heater's inlet;

 fewer "holes" can be left open in the shower head to let

less water pass through

The water is spraying out of

the shower head too

slowly and/or in the

wrong direction (not

into the shower).

The "holes" in the shower head must be cleaned.

VII. Unit cleaning

 Before cleaning, unplug the unit.

 Wipe it with soft wet cloth. Don’t use solvents or abrasives.

 Don’t scrape the body with hard instruments.

Polaris GAMMA 7 Инструкция по эксплуатации онлайн [20/24] 19410

Содержание

Похожие устройства