Polaris VEGA P 5.5 Инструкция по эксплуатации онлайн [20/25] 20081

III. The order of working

The flow-type water heater works automatically. For the working of the water heater it is

recommended to have a pressure not less than 0.25 bar and the output flow of water not less than 1,5

liters per minute. The maximum working pressure is 6 bars.

Before the beginning of working it is necessary:

 to open the water flow with the help of the tap on the water inlet. to set the necessary

temperature on the water outlet by changing the position of the tap.

 if you want to switch the water heater off it is necessary to cut the water off with the

help of the tap on the water inlet.

IV. Technical service regulation.

In the durative process of exploitation, when the warranty period is over, it is necessary to make

routine repairs once or twice a year.

- Turn the water heater off the main electrical supply

- Examine the water heater carefully , clean the water heater with the duster, check the water pipes,

remove the corrosion (if it is necessary to blow off) and cover with the layer of protective

lubrication.

ATTENTION!

Be careful! There mustn’t be any obstructions in the water outlet hose and shower- head.

- clean the injectors of the shower-head

- make the shifting of the screwed connections.

If the hydraulic drop (water flow) become worse, you should clean the rings of the water heater and

a strain (filter) which is set up at the inlet of the water heater.

V. Accessories

Model Accessories Shower Flexible pipe

1,5 м

Bracket Set of

rubber

gaskets

"S" for

kitchen

VEGA P

5.5

shower

+ + + +

sink

+ +

Additionally should be bought: an electric wire, a regular tap, a hose for the connection to the cold

water pipe.

VI. Trouble shouting

The functioning of the heater can be tested after installation as follows—turn it on and press the

"supply choice button" for maximum heat, with the shower head also set for Winter (few "holes"

open for maximum heat). Now, set the water flow to minimum. The heater is working well if the

water becomes hot.