Polaris PDF 23 Lux Инструкция по эксплуатации онлайн [11/14] 16945

V. Operation the appliance

 Use ON/SPEED button to switch on the fan. It starts working in high speed mode.

 Press again the ON/SPEED button to change the speed mode to low. There are 2 speeds.

 Press OFF button to switch off the fan.

 Press TIMER button to set the time period of work (1 – 8 hours).

All functions are shown on the display together with the temperature of the room.

Oscillating mode

 To make the fan head move from side to side push the Oscillating

pin (1) down.

 To stop - pull the pin up.

Choosing a slope

 Unfasten the angle regulator.

 Choose a desirable slope angle.

 Fasten the angle regulator

VI. Cleaning and storage

 Switch off and unplug from the power supply before cleaning.

 We recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan

grill to remove any dust or dirt that may have accumulated inside or on the unit.

 Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan housing. Before

switching on remove the rest of the water using a soft and dry cloth.

 Do not allow water to drip on or into the fan motor housing.

 Don’t use sprays.

Attention: To protect against fire or electric shock, do not allow any water to drip on or into the fan. The

motor of the fan was lubricated during the assembling process in the plant. An additional lubrication while

using the appliance is not needed. There is also no need in any technical maintenance from the user. The

repair must be done just by qualified specialists of the service center.

The unit should be kept in a clean and dry place.

VII. Technical information

Voltage: 220 V

Power: 30 W

Blades diameter: 23 cm

Note: Some differences between the user’s manual and the article are possible to exist, according to the

permanent process of technological modernization. We do hope that it will not cause you any

inconveniences.