SOLER&PALAU silent-100 cz — настройка вентилятора с таймером и гигростатом для автоматической работы [12/80]
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

SOLER&PALAU silent-100 cz — настройка вентилятора с таймером и гигростатом для автоматической работы [12/80]

SOLER&PALAU silent-100 crz [12/80] Silent 100 crlz this version is only aya i labl_e_as_sileniy_00
the fan with timer utilising the same switch as
for the lighting circuit.
To set the timer, turn the potentiometer on the
printed circuit board as (fig. 7).
- To reduce the "run on" time, turn
anticlockwise (min. 1 minutes)
- To increase the "run on" time , turn clockwise
(max: 30 minutes).
This model is provided with an adjustable
over-run timer. The timer allows the fan to
continue to operate for the selected period
after the switch has been turned off (fig.6).
Model provided with a 4 positions adjustable
electronic timer:Fig.5 shows how to connect
the fan with timer utilising the same switch as
for the lighting circuit.
To set the timer, turn the potentiometer on the
printed circuit board as (fig. 7).
:
-Iftheperiodofoperationislessthan50seconds
then the over-run timer willnot operate
- If the period of operation is more than 50
seconds then the over-run timer will operate in
accordance to the period of operation
: 5 minutes "run on" time
: 20 minutes "run on" time
: 30 minutes "run on" time
Models provided with an electronic
humidistat which can be adjusted from 60%
to 90 % RH (relative humidity) and with a
timer, adjustable between 2 and 20 minutes.
1:Automatic operation (fig.9)
In automatic operation, the humidistat causes
the extractor to operate automatically when
the humidity level in the room is higher than
the set level. The extractor will stop
automatically when the humidity drops below
the selected level and after the selected
period set on the timer.
2: Automatic operation as in case 1 with
the facility to override the hygrostat by means
of the light switch (fig.8), when the humidity
level in the room is lower than the selected
level. In this case, the extractor continues to
operate for the selected period set on the timer
after the switch light hasbeen switched off.
The desired humidity level is selected by
means of a potentiometer “ ” positioned
on the printed circuit board (fig.10) and
accessible once the grille (1) has been
removed.
- To reduce the humidity setting turn
anticlockwise (min.60 %)
- To increase the humidity setting turn
clockwise (max. 90 %)
To set the timer, turn the potentiometer “
” on the printed circuit board (fig.10):
- To reduce the "run on" time, turn
anticlockwise (min. 2 minutes)
- To increase the "run on" time , turn clockwise
(max: 20 minutes).
These models are provided with an electronic
humidistat which can be adjusted between
60, 70, 80 or 90% RH (relative humidity) and
with an automatic run-on-timer, adjustable
between 5, 10 or 20 minutes. The humidistat
adjustment can be made using the
corresponding adjustment touch without the
need to remove the front grille of the fan
The desired humidity level is selected by
means of an adjustment touch (5 fig.11)
located on the front grill. The corresponding
relative humidity level, 60-70-80 or 90%, is
then visually indicated via one of four neon
lights. All models are factory set as standard
to a 90% relative humidity level.
SILENT-100 CRIZ (this version is only
available as SILENT-100)
SILENT CHZ
SILENT-100 CHZ VISUAL (this version is
only available as SILENT-100)
ATTENTION: The product also includes an
over-run timer facility that starts the fan
after the first 50 seconds of non-
operation. After these first 50 seconds the
fan operates automatically.
Case
Case
ATENTION: When the himidity rate is
above the selected value, the automatic
option takes precedence over the manual
and the unit cannot then be switched off
using a switch.
% Hr
t
min.
HUMIDISTAT
PositionAuto
Position 5'
Position 20'
Position 30'
Operation
(withamaximumof30minutes).

Содержание

Похожие устройства

the fan with timer utilising the same switch as for the lighting circuit To set the timer turn the potentiometer on the printed circuitboard as ig 7 lb reduce the run on time turn anticlockwise min 1 minutes lb increase the run on time turn clockwise max 30 minutes SILENT 100 CRLZ this version is only aya i labl_e_as_SILENiy_00 This model is provided with an adjustable over run timer The timer allows the fan to continue to operate for the selected period after the switch has been turned off fig 6 ATTENTION The product also includes an over run timer facility that starts the fan after the first 50 seconds of non operation After these first 50 seconds the fan operates automatically Model provided with a 4 positions adjustable electronic timer Fig 5 shows how to connect the fan with timer utilising the same switch as for the lighting circuit To set the timer turn the potentiometer on the printed circuitboard as ig 7 PositonAuto 1 f th e period of op eration is less tha n 50 seconds then theover run timer will notoperate If the period of operation is more than 50 seconds then the over run timer will operate in accordance to the period of operation with a maximum of 30 minutes Position 5 5 minutes run on time Position 20 20 minutes run on time Position 30 30 minutes run on time SILENTCHZ Models provided with an electronic humidistat which can be adjusted from 60 to 90 RH relative humidity and with a timer adjustable between2 and 20 minutes Operation Case 1 Automatic operation fig 9 In automatic operation the humidistat causes the extractor to operate automatically when the humidity level in the room is higher than the set level The extractor will stop automatically when the humidity drops below the selected level and period set on the timer after the selected Case 2 Automatic operation as in case 1 with the facility to override the hygrostat by means of the light switch ig 8 when the humidity level in the room is lower than the selected level In this case the extractor continues to operate for the selected period set on the timer after the switch light has been switched off ATENTION When the himidity rate is above the selected value the automatic option takes precedence over the manual and the unit cannot then be switched off using a switch The desired humidity level is selected by means of a potentiometer Hr positioned on the printed circuit board ig 10 and accessible once the grille 1 has been removed lb reduce the humidity setting turn anticlockwise min 60 To increase the humidity setting turn clockwise max 90 To set the timer turn the potentiometer t min on the printed circuit board fig 10 lb reduce the run on time turn anticlockwise min 2 minutes lb increase the run on lime turn dockwise max 20 minutes SILENT 100 CHZ VISUAL this version is only available as SILENT 100 These models are provided with an electronic humidistat which can be adjusted between 60 70 80 or 90 RH relative humidity and with an automatic run on timer adjustable between 5 10 or 20 minutes The humidistat adjustment can be made using the corresponding adjustment touch without the need to remove the front grille of the fan HUMIDISTAT The desired humidity level is selected by means of an adjustment touch 5 fig 11 located on the front grill The corresponding relative humidity level 60 70 80 or 90 is then visually indicated via one of four neon lights All models are factory set as standard to a 90 relative humidity level

Узнайте, как настроить вентилятор с таймером и гигростатом для автоматической работы в зависимости от уровня влажности. Подробные инструкции по настройке.

Скачать
Заметки