CONEL CR10 v2 — настройка WLAN через веб-браузер: Полное руководство [44/106]

Превью страниц Страница 44 / 106

1. CONFIGURATION OVER WEB BROWSER

1.16 WLAN conﬁguration

This item is available only if the router is equipped with a WiFi module.

The form for conﬁguration of WiFi network and DHCP server functioning on this network

can be invoked by pressing the WLAN item in the main menu of the router web interface.

Enable WLAN interface check box at the top of this form is used to activate WIFi LAN interface.

It is also possible to set the following properties:

Item description

Operating Mode WiFi operating mode:

• access point (AP) – router becomes an access point to

which other devices in station (STA) mode can be connected

• station (STA) – router becomes a client station, it means

that receives data packets from the available access point

(AP) and sends data from cable connection via wiﬁ network

DHCP Client Activates/deactivates DHCP client

IP Address Fixed set IP address of WiFi network interface

Subnet Mask Subnet mask of WiFi network interface

Bridged Activates bridge mode:

• no – Bridged mode is not allowed (it’s default value). WLAN

network is not connected with LAN network of the router.

• yes – Bridged mode is allowed. WLAN network is connected

with one or more LAN network of the router. In this case, the

setting of most items in this table is ignored. Instead, it takes

setting of selected network interface (LAN).

Default Gateway IP address of default gateway. When entering IP address of de-

fault gateway, all packets for which the record was not found in the

routing table are sent to this address.

DNS Server Address to which all DNS queries are forwarded

Table 28: WLAN conﬁguration