Syma f3 [4/12] Assembly of battery to helicopter

ASSEMBLY OF BATTERY TO HELICOPTER

level surface

Insert fully charged battery into the

socket and press tight.

Precautions

1. When the indicator of controller is lit state, but the helicopter indicator is

flashing, it means the helicopter fail to match the signalwith controller .You

need to turn off controller and helicopter and turn on them again to match

signal.

2. When the helicopter fail to hover and always turn around, please re-start

the controller and helicopter.

3.Make sure the battery installed into the helicopter well within 10 seconds

when the controller opening ,or you can not complete the code .

4.Indicator on the helicopter lights off or lights flashing when the helicopter

crashing obstructions

Step one: Open the controller ,then controller ticking and indicator flashes

quickly

Step Two: Install the battery into the battery case , then set the helicopter

on a level surface ,indicator will flash two times the first slow , then indicator

becomes to Medium-speed flash.

Step Three: Push the controller throttle to the top ,and then pull it to the

low-end ,ticking sound once again ,indicators on the helicopter and controller

lighting up ,which means that the success of the codes