Yealink W52P Инструкция по эксплуатации онлайн [35/98] 166931

Basic Operations

To unlock the keypad via the handset:

1. Long press again until the LCD screen prompts “Keypad Unlocked”.

The keypad is unlocked and the icon disappears from the idle screen.

Note

You can locate a misplaced handset using the base station to which the handset is

registered.

To locate a handset via the handset:

1. Press on the base station.

All handsets registered to this base station will ring simultaneously (Paging) and

display the IP address of the base station on the LCD screen.

This helps you locate your handset easily.

You can press any key on the handset or press again on the base station to

end paging.

You can also locate handsets via web user interface at the path

Status->Handset&VoIP->Paging.

If the silent mode is switched on, the handset will not ring when receiving an incoming

call, but you can still see the incoming call information on the LCD screen. You can switch

the silent mode on if you do not want to be disturbed.

To switch the silent mode on via the handset:

1. Long press until the LCD screen prompts “All Ring Tones Off”.

The silent mode is on. The icon appears on the status line.

To switch the silent mode off via the handset:

1. Long press again until the LCD screen prompts “All Ring Tones On”.

The silent mode is off. The icon disappears from the status line.

The handset provides a variety of features that are grouped into menu. This section

If the keypad is locked, only the emergency numbers can be dialed out. You must enter

the emergency number continuously. To place emergency calls, you should configure the

emergency numbers in advance. For more information, refer to Emergency Numbers on

page 43.