Yealink SIP-T40P [263/465] Static network settings

Yealink SIP-T40P [263/465] Static network settings
Appendix
249
parameter network.internet_port.type is set
to 0 (DHCP).
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
network.static_dns_enable= 0
Parameter-
network.internet_port.type
Configuration File
<MAC>.cfg
Description
Configures the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-DHCP
1-PPPoE (not applicable to SIP-T42G/T41P)
2-Static IP Address
Example
network.internet_port.type = 2
Parameter-
network.ip_address_mode
Configuration File
<MAC>.cfg
Description
Configures the IP addressing mode.
IP phones support to use the IPv4 address only,
the IPv6 address only or both IPv4 and IPv6
addresses.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.

Содержание

Похожие устройства