Graco Coriolis [12/14] Part no 234563

Содержание

• Instructions p.1
• Part no 234563 p.1
• Coriolis meter kit p.1
• Warnings p.2
• Warning p.2
• Contents p.2
• Warning p.3
• Mounting p.4
• Location p.4
• Installation requirements p.4
• Installation p.4
• Fluid supply p.4
• Overview p.4
• Vertical mounting p.5
• Horizontal mounting p.5
• Fluid line connection p.5
• Power supply installation p.6
• Power harnesses and cables p.6
• Meter signal cable p.6
• Cable connections p.6
• Promix ii p.7
• Promix auto and procontrol p.7
• Installation p.7
• Flow meter signal wire schematics p.7
• Connect a ground wire to the meter mounting holes p.8
• Flow meter sensor p.8
• Connect the conductive fluid hose to the meter inlet and outlet p.8
• 310696f p.8
• Your system must be grounded never use the flow meter with an electrostatic gun isolation system read warnings page 2 p.8
• Warning p.8
• To connect to meter p.8
• The power cable 3 and signal cable 4 are factory assembled to the meter if cables need servicing or replacement see p.8
• Power and signal cable connections to meter p.8
• Meter fluid manifold p.8
• Installation p.8
• Have a qualified electrician check resistance between the flow meter sensor and a true earth ground if resis tance is greater than 1 ohm a different ground site may be required do not operate until the problem is cor rected p.8
• Group and function navigation p.8
• Grounding p.8
• Ground the meter fluid housing using one of the follow ing options p.8
• Ground the flow meter sensor by connecting a ground wire between the ground lug d and true earth ground p.8
• Start up p.9
• Pressure relief procedure p.9
• Operation p.9
• A with proportioner system p.9
• Using promass 80a with proportioner system p.9
• Using promas p.9
• Table 1 values to use with proportioner p.10
• Measuring values p.10
• Function matrix p.10
• Operation mode p.11
• Operation p.11
• On val lf out off p.11
• Groups functions p.11
• Function matrix p.11
• Current output 1 2 p.11
• Assign totalizer p.11
• Assign pulse pulse value pulse width output signal p.11
• User interface p.11
• Assign line 1 assign line 2 p.11
• Unit volume flow p.11
• Assign lf cut off p.11
• Unit volume p.11
• Assign current p.11
• Totalizer 1 2 p.11
• System units p.11
• Reset total p.11
• Pulse freq out p.11
• Process param p.11
• Part no 234563 p.12
• Technical data p.13
• Dimensions p.13
• Graco information p.14
• Graco standard warranty p.14
• Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa p.14
• Graco headquarters minneapolis international offices belgium china japan korea p.14
• For the latest information about graco products visit www graco com p.14
• Copyright 2004 graco inc all graco manufacturing locations are registered to iso 9001 www graco com revised september 2012 p.14
• To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 p.14