![Graco 256295 [5/12] Installation](/img/pdf.png)
Graco 256295 [5/12] Installation
![Graco 256994 [5/12] Installation](/views2/1193574/page5/bg5.png)
Installation
312783E 5
Installation
1. Connect 5/32 in. (4 mm) OD air actuation tubes
from the valve solenoids to the air inlets (A) of each
valve. See F
IG
. 1.
NOTE: The high pressure color change valve uses a
spring-operated valve closure vent (20) which does not
require a second air actuation line. If you are installing a
bare valve, remove the elbow fitting from the top port
and install the breather vent. Replace the spring with the
one marked with black stain. Both the breather and the
marked spring are shipped loose.
2. Connect fluid supply lines to the 1/4 npt(f) inlet (B) of
each valve adapter. Supply solvent to one valve (S)
at the top of the stack.
NOTE: Excessive inlet fitting torque may cause the fit-
ting to extend past its normal depth and contact the
valve needle, resulting in misalignment and leakage.
After installing the inlet fitting, verify that the needle trav-
els freely by charging the valve with air or removing the
cap and manually actuating the needle.
NOTE: Paint Circulating System
The color change valves have two fluid ports for
each individual valve. If you are circulating
paint, plumb the valves in one port and out the
other. Another option is to use a tee fitting to cir-
culate.
NOTE: Verify that all unused fluid ports on the color
change valve stack are plugged before operation. An
open port will leak fluid.
3. Connect the gun fluid supply line to the fluid outlet
port (C) of the color change manifold.
NOTE: A check valve is recommended at the inlet of all
valves to prevent backflow if a valve fails, and to prevent
color crossover if two dead head valves are open at the
same time.
NOTE: High pressure valves are factory-set at one turn
open from fully closed. This setting provides the
required spring force to prevent fluid back flow from the
outlet manifold to the valve at outlet manifold pressures
up to 3000 psi (21 MPa, 210 bar). If valves on the stack
are not being used, close the valve completely or plug
the valve inlet and circulation ports.
If a valve is adjusted more than 1-1/4 turn open, back
flow pressure will be reduced.
F
IG
. 1. Valve Stack Connections
TI11665A
TI11668A
C
A
B
A
A
B
C
20
High Pressure Valve Stack
S
S
Low Pressure Valve Stack
Содержание
- Color and catalyst change valve stacks 1
- For color catalyst changing or distribution of industrial paints and coatings or fluids 1
- Instructions parts 1
- Contents 2
- Related manuals 2
- Low pressure valve stacks 3
- Models 3
- High pressure valve stacks 4
- Installation 5
- Low pressure color catalyst valve stacks 6
- Technical data low pressure stacks 6
- Find your valve stack part no in the left column and the desired reference number in the top row to find the part quantity used in your valve stack 7
- Low pressure valve part quantity chart 7
- High pressure color catalyst valve stacks 8
- Technical data high pressure stacks 8
- Find your valve stack part no in the left column and the desired reference number in the top row to find the part quantity used in your valve stack 9
- High pressure valve part quantity chart 9
- Dimensions 10
- Low pressure valve stack dimensions 10
- High pressure valve stack dimensions 11
- Copyright 2008 graco inc all graco manufacturing locations are registered to iso 9001 www graco com revision e august 2014 12
- For patent information see www graco com patents 12
- For the latest information about graco products visit www graco com 12
- Graco headquarters minneapolis international offices belgium china japan korea 12
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa 12
- Graco information 12
- Graco standard warranty 12
- Original instructions 12
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 12
Похожие устройства
- Graco 256295 Технические характеристики
- Graco 256296 Инструкция по эксплуатации
- Graco 256296 Технические характеристики
- Graco 256297 Инструкция по эксплуатации
- Graco 256297 Технические характеристики
- Graco 256298 Инструкция по эксплуатации
- Graco 256298 Технические характеристики
- Graco 15V815 Инструкция по эксплуатации
- Graco 15V815 Технические характеристики
- Graco 256300 Инструкция по эксплуатации
- Graco 256300 Технические характеристики
- Graco 256301 Инструкция по эксплуатации
- Graco 256301 Технические характеристики
- Graco 256302 Инструкция по эксплуатации
- Graco 256302 Технические характеристики
- Graco 256303 Инструкция по эксплуатации
- Graco 256303 Технические характеристики
- Graco 256304 Инструкция по эксплуатации
- Graco 256304 Технические характеристики
- Graco 256305 Инструкция по эксплуатации