Karcher BDS 43/150 C [16/268] Maintenance and care

Karcher BDS 43/150 C [16/268] Maintenance and care
– 5
Î Apply the detergent solution to the floor
or use the dosing lever of the detergent
tank (option).
Î Move the appliance over the surface to
be cleaned.
Î Repeat process for severe contamination.
Î Afterwards, pick up the wastewater with
a wet vacuum or a cloth.
Caution
Risk of injury, risk of damage. The speed
switch may only be used while the appli-
ance is idle.
Î Turn off the appliance.
Î Select the desired speed via the speed
switch:
Position I = 150 U/min
Position II = 300 U/min
Î Disconnect the mains plug from the
socket.
Î Pull the lever for level adjustment and
bring the handle in a vertical position.
Î Remove the detergent tank (option) and
dispose of unused detergent solution.
Î Swivel the top cable hook downward.
Î Coil the mains cable as shown.
Î Swivel the top cable hook upward.
Î Rinse the detergent tank (option) with
clear water.
Î Place the appliance into the parking po-
sition.
Î Remove the driver plate / disc brush.
Î Clean the casing with a damp cloth.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Î Swivel the handle vertically and lock it.
Î Tilt the appliance backwards into the
transport position and drive it to its des-
tination location.
Î When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Î Place the appliance into the parking po-
sition.
Î Store the appliance in a dry room, frost-
protected room.
Î Rinse contaminated disc brushes with
water.
Î Wash contaminated pads at a max.
temperature of 60 °C.
Î Clean the casing with a damp cloth.
Î Check the mains connection cable for
damages.
Cleaning
Adjust the speed (BDS 43/Duo C)
Shutting down
Transport
Storage
Maintenance and care
16 EN

Содержание

Похожие устройства

Скачать