Moxa EDS-G205-1GTXSFP-T [12/13] Auto negotiation and speed sensing

Moxa EDS-G205-T [12/13] Auto negotiation and speed sensing
- 12 -
Auto-Negotiation and Speed Sensing
The EDS’s RJ45 Ethernet ports independently support auto-negotiation
for transmission speeds of 10 Mbps, 100 Mbps, and 1000 Mbps, with
operation according to the IEEE 802.3 standard.
This means that some nodes could be operating at 10 Mbps, while at the
same time, other nodes are operating at 100 Mbps or 1000Mbps.
Auto-negotiation takes place when an RJ45 cable connection is made, and
then each time a LINK is enabled. The EDS advertises its capability for
using 10 Mbps, 100 Mbps, or 1000 Mbps transmission speeds, with the
device at the other end of the cable expected to advertise similarly.
Depending on what type of device is connected, this will result in
agreement to operate at a speed of 10 Mbps, 100 Mbps, or 1000 Mbps.
If an EDS’s RJ45 Ethernet port is connected to a non-negotiating device,
it will default to 10 Mbps speed and half-duplex mode, as required by the
IEEE 802.3 standard.
Specifications
Specifications and Pin Assignments
Technology
Standards
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000BaseT,
Interface
RJ45 Ports
10/100/1000BaseT(X) auto negotiation speed
LED Indicators
PWR1, PWR2, FAULT, 10/100M/1000M
DIP Switch
Port break alarm, broadcast storm protection
Alarm Contact
One relay output with current carrying capacity
of 1A @ 24 VDC
Power
Input Voltage
12/24/48 VDC (9.6 to 60 VDC)
Input Current @ 24VDC
0.2A
Connection
One removable 6-pin terminal block
Overload Current
Protection
Present
Reverse Polarity
Protection
Present
Mechanical
Casing
IP30 protection, metal case
Dimension (W x H x D)
35 x 130 x 105 mm (1.37 x 4.05 x 4.13 in)
Weight
290g
Installation
DIN-rail, Wall Mounting (optional kit)
Environmental
Operating Temperature
0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for -T models
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative
Humidity
5 to 95% (non-condensing)
Regulatory Approvals
Safety
UL 508(Pending)
Hazardous Location
UL/cUL Class I, Division 2, Groups A, B, C, and D;
ATEX Zone 2, Ex nA nC IIC T4 Gc
Скачать