Moxa PM-7200-2GTXSFP [136/155] Storm control

Moxa PM-7200-2GTXSFP [136/155] Storm control
Moxa Command Line Interface (FW_4.x) Commands
2-127
storm-control
Use the storm-control global configuration command on the switch to enable the storm protection. Use the no
form of this command to disable it or return to the default.
Commands
storm-control { bcast | mcast }
no storm-control bcast
no storm-control mcast
no storm-control
Syntax
Description
storm-control Storm protection
bcast Storm protection for broadcast traffic
mcast Storm protection for Multicast traffic
Defaults The broadcast storm protection is default enabled.
Command
Modes
Global configuration
Usage
Guidelines
N/A
Examples
storm-control
bcast - Storm protection for broadcast traffic
mcast - Storm protection for Multicast traffic
Error
messages
N/A
Related
commands
show storm-control
switchport access vlan
Use the switchport access vlan interface configuration command on the switch to configure a port as a
static-access or dynamic-access port. If the switchport mode is set to access, the port operates as a member
of the specified VLAN. If set to dynamic, the port starts discovery of VLAN assignment based on the incoming
packets it receives. Use the no form of this command to reset the access mode to the default VLAN for the
switch.
Commands
switchport access vlan vlan-id
no switchport access vlan
Syntax
Description
switchport Set switching mode characteristics
access Set access mode characteristics of the interface
vlan Set (default) pvid in access mode
vlan-id 1 to 4094
Defaults vlan-id = 1
Command
Modes
Interface configuration
Usage
Guidelines
You can only use this command mode for configuring normal-range VLANs, that is, VLAN IDs 1
to 4094.
Examples
PT-7828(config-if)# switchport access vlan 2
<UINT:vlanid> - 1 to 4094
Error
messages
vlan 4097 is invalid!! should be range from 1 to 4094
Related
commands
show vlan
show vlan config

Содержание

Похожие устройства

Скачать