M-Audio CT-14 [3/4] Ct 14 hook up diagram

1. With the CT-14 power button in the “out” (off) position, plug the

appropriate end of the supplied 9-Volt DC “wall-wart” power

adapter into your CT-14 and the other end into a wall socket or

power strip. The CT-14 power indicator LED should be off.

2. Take the output of your digital audio source device and plug it into

the CT-14 coaxial RCA input connector located on the rear of the

CT-14 .

3. Connect the CT-14’s coaxial RCA digital output connectors to the

inputs of your receiving or “target” digital audio devices. You may

want to connect the analog audio output of one of these target

devices to a sound system for monitoring purposes.

4. With all volumes turned down, turn on your source device.

5. Turn on the CT-14 by pressing its power button and allowing it to

latch in the “in” position. The power indicator LED will light on the

front of the CT-14 unit.

6. Turn on your target devices. Your CT-14 is now ready for use.

CT-14

Hook-Up

Diagram