Moxa V2201-E1-T-LX [9/10] Attention
![Moxa V2201-E4-W-T [9/10] Attention](/views2/1199191/page9/bg9.png)
- 9 -
ATTENTION
There is a risk of explosion if the battery is replaced by an
incorrect type of battery.
Powering on the V2201
To power on the V2201, connect the “terminal block to power jack
converter” to the V2201’s DC terminal block (located on the side panel),
and then connect the 9 to 36 VDC power adapter. Press the Power Button
to turn on the computer. Note that the Shielded Ground wire should be
connected to the top pin of the terminal block. It takes about 30 seconds
for the system to boot up. Once the system is ready, the Power LED will
light up.
Connecting the V2201 to a PC
Power on the V2201 computer after connecting a monitor, keyboard, and
mouse, and verifying that the power source is ready. Once the operating
system boots up, the first step is to configure the Ethernet interface. The
factory default settings for the V2201’s LANs are show below (W7E uses
DHCP).
Default IP Address
Netmask
LAN 1
192.168.3.127
255.255.255.0
LAN 2
192.168.4.127
255.255.255.0
Configuring the Ethernet Interface
Linux users should follow these steps:
If you use the console cable to configure network settings for the first
time, use the following commands to edit the interfaces file:
#ifdown –a
//Disable LAN1~LAN2 interface first, before you
reconfigure the LAN settings. LAN1 = eth0, LAN2 = eth1//
#vi /etc/network/interfaces
//check the LAN interface first//
After the boot setting of the LAN interface has been modified, use the
following commands to immediately activate the LAN settings:
#sync; ifup –a
W7E users should follow these steps:
STEP 1:
Go to Start
Control Panel
Network and Internet
View
network status and tasks
Change adapter setting.
STEP 2:
In the Local Area Connection Properties screen, click Internet
Protocol (TCP/IP) and then select Properties. Select Internet
Protocol Version 4, and then click Properties.
STEP 3:
Click OK after inputting the proper IP address and netmask.
Содержание
- Edition 1 october 2015 1
- V2201 quick installation guide 1
- Overview 2
- Package checklist 2
- V2201 panel layout 2
- Attention attention 4
- Installing the wireless modules 4
- Installing the v2201 5
- Connector description 6
- Attention 7
- Attention 9
- Configuring the ethernet interface 9
- Connecting the v2201 to a pc 9
- Powering on the v2201 9
Похожие устройства
- Moxa V2201-E1-T-LX Технические характеристики
- STAYER SCSD-4.8 Руководство по эксплуатации
- STAYER SCSD-4.8-B Руководство по эксплуатации
- STAYER SCSD-4.8-MB Руководство по эксплуатации
- STAYER SCSD-4.8-F Руководство по эксплуатации
- STAYER SCD-12 Руководство по эксплуатации
- STAYER SCD-14.4 Руководство по эксплуатации
- STAYER SCD-18-B Руководство по эксплуатации
- Moxa V2201-E1-T-W7E Инструкция по эксплуатации
- Moxa V2201-E1-T-W7E Руководство по программной части (Windows)
- Moxa V2201-E1-T-W7E Руководство по программной части (Linux)
- Moxa V2201-E1-T-W7E Руководство по быстрой установке
- Moxa V2201-E1-T-W7E Технические характеристики
- Moxa V2201-E2-T Инструкция по эксплуатации
- Moxa V2201-E2-T Руководство по программной части (Windows)
- Moxa V2201-E2-T Руководство по программной части (Linux)
- Moxa V2201-E2-T Руководство по быстрой установке
- Moxa V2201-E2-T Технические характеристики
- Moxa V2201-E4-T Инструкция по эксплуатации
- Moxa V2201-E4-T Руководство по программной части (Linux)