Moxa IA260-LX [2/3] Hardware specifications

Moxa IA260-T-CE [2/3] Hardware specifications
Compact/Fanless Computers
2
www.moxa.com
Hardware Specifications
Computer
CPU: Cirrus EP9315 ARM9 CPU, 200 MHz
USB: USB 2.0 hosts x 2, type A connector
DRAM: DDR2 SDRAM, 128 MB
Flash: NOR Flash, 32 MB
OS (pre-installed): Linux or Windows CE 6.0
Storage
Storage Expansion: CF card type I/II
Display
Graphics Controller: EP9315 internal graphics accelerator engine with
TTL graphical signal support
Display Memory: Dynamic video memory (shares system memory)
Display Interface: CRT interface for VGA output, DB15 female
connector
Resolution: 1024 x 768, 8 bits
Ethernet Interface
LAN: Auto-sensing 10/100 Mbps ports (RJ45) x 2
Magnetic Isolation Protection: 1.5 kV built-in
Serial Interface
Serial Standards: RS-232/422/485 ports, software-selectable (DB9
male) x 4
ESD Protection: 4 kV for all signals
Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200,
n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction
control) for RS-485
Baudrate: 50 bps to 921.6 kbps (supports nonstandard baudrates; see
user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: DI x 8
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: 10-pin screw-fastened terminal block (8 points, COM,
GND)
Isolation: 3 kV optical isolation
Digital Output
Output Channels: DO x 8, sink type
Output Current: Max. 200 mA per channel
On-State Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 9-pin screw-fastened terminal block
Isolation: 3 kV optical isolation
LEDs
System: Power, Ready, Storage
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 4, RxD x 4
Switches and Buttons
Reset Button: Supports “Reset to Factory Default”
Physical Characteristics
Housing: Aluminum, industrial vertical form factor
Weight: 1 kg (2.22 lb)
Dimensions: 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in)
Mounting: DIN-rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-Vibration: 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr
per axis
Anti-Shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage: 12 to 48 VDC (3-pin terminal block)
Input Current:
With no load on USB ports:
• 240 mA @ 24 VDC
• 480 mA @ 12 VDC
With full load on USB ports:
• 450 mA @ 24 VDC
• 900 mA @ 12 VDC
Power Consumption:
With no load on USB ports: 5.8 W
With full load on USB ports: 11 W
Standards and Certifications
Safety: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, CCC
(GB4943, GB9254, GB17625.1)
EMC: EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN
55024, FCC Part 15 Subpart B Class A
EMS:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: Signal: 3 V/m
IEC 61000-4-8 1 A/m
IEC 61000-4-11
Green Product: RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time: 145,328 hrs
Standard: Telcordia (Bellcore) Standard
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Note: The Hardware Specications apply to the embedded computer unit itself,
but not to accessories. In particular, the wide temperature specication does not
apply to accessories such as the power adapter and cables.

Похожие устройства

Скачать