![Moxa IA260-T-LX [15/71] Modifying network settings by command](/img/pdf.png)
Moxa IA260-T-LX [15/71] Modifying network settings by command
![Moxa IA261-I-T-LX [15/71] Modifying network settings by command](/views2/1199953/page15/bgf.png)
IA260-261-262 EM-2260 LX User’s Manual Getting Started
3.
After the boot settings of the LAN interface have been modified, issue the following
command to activate the LAN settings immediately:
#/etc/init.d/networking restart
NOTE After changing the IP settings, use the networking restart command to activate the new IP
address.
Modifying Network Settings by Command
IP settings can be activated over the command, but the new settings will not be saved to the flash
ROM without modifying the file
/etc/network/interfaces
.
For example, type the command
#ifconfig eth0 192.168.1.1
to change the IP address of
LAN1 to 192.168.1.1.
CF Socket for Storage Expansion
The IA260/IA261/IA262 provides a CF socket for storage expansion. Moxa provides a CF flash
disk for expansion that allows users to plug in a Compat Flash (CF) memory card of additional
memory space. The CF socket is located on the front panel of the IA260/IA261/IA262. To install a
CF card, you must first power off, and then plug the CF card directly into the socket.
The CF card will be mounted at
/mnt/cf.
Test Program—Developing Hello.c
In this section, we use the standard “Hello” programming example to illustrate how to develop a
program for the IA260/IA261/IA262/EM-2260. In general, program development involves the
following seven steps.
Step 1:
Connect the IA260/IA261/IA262/EM-2260 to a Linux PC.
Step 2:
Install Tool Chain (GNU Cross Compiler & glibc).
Step 3:
Set the cross compiler and glibc environment variables.
Step 4:
Code and compile the program.
Step 5:
Download the program to the IA260/IA261/IA262/EM-2260
Via FTP or NFS.
Step 6:
Debug the program
Æ If bugs are found, return to Step 4.
Æ If no bugs are found, continue with Step 7.
Step 7:
Back up the user directory (distribute the program to additional
IA260/IA261/IA262/EM-2260 units if needed).
x86
Cross
Compiler
2-7
Содержание
- First edition january 2009 1
- Ia260 ia261 ia262 em 2260 linux user s manual 1
- Www moxa com product 1
- Copyright notice 2
- Disclaimer 2
- Ia260 ia261 ia262 em 2260 linux user s manual 2
- Technical support contact information www moxa com support 2
- Trademarks 2
- Table of contents 3
- Introduction 5
- Overview 6
- Software architecture 6
- Journaling flash file system jffs2 7
- Software package 8
- Getting started 9
- Connecting the ia260 ia261 ia262 em 2260 to a pc 10
- Debug port 10
- Powering on the ia260 ia261 ia262 em 2260 10
- Telnet console 11
- Ssh console 12
- Windows users 12
- Linux users 13
- Configuring the ethernet interface 14
- Modifying network settings 14
- Vga console 14
- Cf socket for storage expansion 15
- Modifying network settings by command 15
- Test program developing hello c 15
- Checking the flash memory space 16
- Installing the tool chain linux 16
- Compiling hello c 17
- Uploading and running the hello program 17
- Managing embedded linux 18
- System version information 19
- Upgrading the firmware 19
- Attention 21
- Ia260 261 262 em 2260 lx user s manual managing embedded linux 21
- Next use the upgradehfm command to upgrade the kernel and root file system 21
- The upgradehfm utility will reboot your target after the upgrade is ok 21
- Enabling and disabling daemons 22
- Ia260 261 262 em 2260 lx user s manual managing embedded linux 22
- Loading factory defaults 22
- Snmpd snmp agent daemon telnetd telnet server daemon and client inetd internet daemons ftpd ftp server daemon and client sshd secure shell server daemon httpd apache www server daemon 22
- The following daemons are enabled when the ia260 ia261 ia262 em 2260 boots up for the first time 22
- To load the factory default settings you must press the reset to default button for more than 5 seconds all files in the home etc directories will be deleted note that while pressing the reset to default button the ready led will blink three times and then turn off it takes about one minute for the factory defaults to fully load for users who have logged onto the computer please note that they will be forcibly logged out when the factory defaults are loaded and the systems start to reboot 22
- Type the command ps to list all processes currently running 22
- Ia260 261 262 em 2260 lx user s manual managing embedded linux 23
- Next use vi to open your application script we use the example program tcps2 release and put it to run in the background 23
- The enabled daemons will be available after you reboot the system 23
- To run a private daemon you can edit the file rc local as follows 23
- Setting the run level 24
- Adjusting the system time 25
- Setting the time manually 25
- Ntp client 26
- Updating the time automatically 26
- Cron daemon to execute scheduled commands 27
- Managing communications 28
- Telnet ftp 29
- Web service apache 30
- Ia260 261 262 em 2260 lx user s manual managing communications 32
- Install php for apache web server 32
- Step 1 check that you have enough free space 32
- Step 2 type upramdisk to get the free space ram disk to save the package 32
- Step 3 download the php package from the cd rom you can find the package in cd rom utility_tools libmysqlclientx_x x xx_xxxxxx ipk and rom utility_tools libphpx_x x x_xxxxxx ipk where x indicates the version and cpu model 32
- Step 4 run ipkg cl install libmysqlclient5_5 3_arm ipk and then run ipkg cl install libphp5_5 _arm ipk to install php 32
- Step 5 test it use the browser to access http 192 68 27 phpinfo php 32
- This embedded computer supports the php option however since the php file is 3 mb it is not installed by default to install it yourself first make sure there is enough free space at least 3 mb on your embedded flash rom 32
- To check that the dev mtdblock3 free space is greater than 3 mb 32
- Iptables 34
- Ia260 261 262 em 2260 lx user s manual managing communications 35
- The following figure shows the iptables hierarchy 35
- Observe and erase chain rules 36
- Append or delete rules 37
- Define policy for chain rules 37
- Enabling nat at bootup 39
- Ia260 261 262 em 2260 lx user s manual managing communications 39
- In most real world situations you will want to use a simple shell script to enable nat when the ia260 ia261 ia262 em 2260 boots up the following script is an example 39
- Nat area private ip 39
- Nat example 39
- The ip address of lan1 is changed to 192 68 27 you will need to load the module ipt_masquerade 39
- Dial up service ppp 40
- Example 1 connecting to a ppp server over a simple dial up connection 40
- Example 2 connecting to a ppp server over a hard wired link 41
- How to check the connection 42
- Setting up a machine for incoming ppp connections 43
- Nfs network file system 45
- Setting up the ia260 ia261 ia262 em 2260 as an nfs client 45
- Openvpn 46
- Copy the file that is generated to the openvpn machine 47
- Generate a script file named openvpn bridge on each openvpn machine this script reconfigures interface eth1 as ip less creates logical bridge s and tap interfaces loads modules enables ip forwarding etc 47
- Host a 47
- Host a b represents one of the machines that belongs to openvpn a b the two remote subnets are configured for a different range of ip addresses when this setup is moved to a public network the external interfaces of the openvpn machines should be configured for static ips or connect to another device such as a firewall or dsl box first 47
- Host b 47
- Ia260 261 262 em 2260 lx user s manual managing communications 47
- Internet internet 47
- Lan1 192 68 71 47
- Lan1 192 68 72 lan1 192 68 74 47
- Lan1 192 68 73 47
- Lan2 192 68 73 47
- Lan2 192 68 74 47
- Local net 47
- Openvpn a 47
- Openvpn b 47
- Set up four machines as shown in the following diagram 47
- Setup 1 ethernet bridging for private networks on different subnets 47
- Ia260 261 262 em 2260 lx user s manual managing communications 48
- Create link symbols to enable this script at boot time 49
- Ia260 261 262 em 2260 lx user s manual managing communications 49
- Setup 2 ethernet bridging for private networks on the same subnet 51
- Create a configuration file named a tun conf and an executable script file named a tun sh 52
- Create a configuration file named b tun conf and an executable script file named b tun sh on openvpn b 52
- Host a 52
- Host b 52
- Ia260 261 262 em 2260 lx user s manual managing communications 52
- Internet internet 52
- Lan1 192 68 71 52
- Lan1 192 68 72 lan1 192 68 74 52
- Lan1 192 68 73 52
- Lan2 192 68 73 52
- Lan2 192 68 74 52
- Local net 52
- Openvpn a 52
- Openvpn b 52
- Set up the four machines as shown in the following diagram 52
- Setup 3 routed ip 52
- Development tool chains 54
- Compilation for applications 55
- Linux tool chain 55
- Steps for installing the linux tool chain 55
- On line debugging with gdb 56
- Programmer s guide 57
- Device api 58
- Flash memory map 58
- Rtc real time clock 58
- Buzzer 59
- Baudrate inaccuracy 60
- Example to get the baudrate 60
- Example to set the baudrate 60
- Special note 60
- Introduction 61
- Moxacan programming guide 61
- Programming guide 61
- Application programming interface 64
- Digital i o 64
- Examples 66
- Special note 66
- Ia260 ia261 ia262 em 2260 linux user s manual programmer s guide 67
- Ia260 ia261 ia262 em 2260 linux user s manual programmer s guide 68
- 13 6 13 69
- Bin rm f fname fname dbg o 69
- Dio program make file example 69
- Ia260 ia261 ia262 em 2260 linux user s manual programmer s guide 69
- A system commands 70
- Editor 70
- File manager 70
- Linux normal command utility collection 70
- Network 70
- System commands 70
- Moxa special utilities 71
- Process 71
Похожие устройства
- Moxa IA260-T-LX Руководство по аппаратной части
- Moxa IA260-T-LX Технические характеристики
- Moxa IA260-T-LX Руководство по быстрой установке
- Moxa IA260-T-LX Руководство по работе с утилитой Moxa Device Manager
- Moxa IA261-I-CE Инструкция по эксплуатации
- Moxa IA261-I-CE Руководство по аппаратной части
- Moxa IA261-I-CE Технические характеристики
- Moxa IA261-I-CE Руководство по быстрой установке
- Moxa IA261-I-CE Руководство по работе с утилитой Moxa Device Manager
- Moxa IA261-I-T-CE Инструкция по эксплуатации
- Moxa IA261-I-T-CE Технические характеристики
- Moxa IA261-I-T-CE Руководство по аппаратной части
- Moxa IA261-I-T-CE Руководство по быстрой установке
- Moxa IA261-I-T-CE Руководство по работе с утилитой Moxa Device Manager
- Moxa IA261-I-LX Инструкция по эксплуатации
- Moxa IA261-I-LX Руководство по аппаратной части
- Moxa IA261-I-LX Технические характеристики
- Moxa IA261-I-LX Руководство по быстрой установке
- Moxa IA261-I-LX Руководство по работе с утилитой Moxa Device Manager
- Moxa IA261-I-T-LX Инструкция по эксплуатации