Polaris PCWH 2067Di Инструкция по эксплуатации онлайн [12/15] 17289

• Setting of air flow swing. Press “Swing” button in order to turn this function on, press the button

one more time in order to turn in off.

• Air cleaning. If you will press the “ANION” button for one a time, the ionization function will be

activated. If you will press the button one more time, the function will be deactivated.

• Timer setting. Press the "TIMER" button on the RC in order to activate the timer. Each pressing on

the button increases timer time on 0.5 hour.

Attention! If you turn the heater off, the settings of timer will be deleted from the memory.

When you turn the heater off, it will work in the fan mode for 30 seconds in order to cool the heating

element.

The appliance operating with buttons on the body

Button «function»

• Once you press the «function» button, you will hear the signal, the indicator will light on, the fan

will turn on, the swing leafs will open giving the air stream inside. The air temperature will be shown

on the display.

• If you will press the «function» button one more time, the first heating mode (1kW) will be

activated.

• If you will press the «function» button for the third time, the second heating mode (2kW) will be

activated.

• If you will press the «function» button for the fourth time, the swing function of air stream turns

on, the indicator “Swing” lights on.

The heater will turn off, if you press the “function” button for the fifth time. If the heater operates just

in fan mode, the indicator of fan on the control panel lights out, all the functions stop to operate.

The indicator of fan will light on, when the heater operates in heating mode. When you turn the heater

off, it will work in the fan mode for 30 seconds in order to cool the heating element. The indicator will

light on for this time.

• You will turn on the setting of temperature if press the «function» button and keep it more then 3

seconds. The range of available temperature for setting is 18-45

С. The temperature will rise on 1

for each following press on the temperature button. При последующем однократном нажатии

кнопки установка температуры возрастает на 1

С. If you already set the temperature on 45

С and

press the button one more time. The temperature will be set on 18

С.

«TIMER» button

• Each new press on "TIMER" button, increases the timer time on 0.5 hour.

• You will turn on the ionization function, if keep the "TIMER" button pressed for more, then 3

seconds. You should keep pressed the "TIMER" button at least for 5 seconds in order to turn off the

ionization function.

VI. Cleaning and maintaining.

• Before cleaning unplug the appliance and let it get cool. Wipe it with soft wet cloth. Don’t use solvents

or abrasives.

• You should regularly clean, wipe the dust from the appliance for the dust negatively effects on the

operation of the wall heater.