Karcher B 60 W Bp Pack CLASSIC [30/550] Settings

Karcher B 60 W Bp Pack CLASSIC [30/550] Settings
– 8
Detergent is added to the fresh water on
the way to the cleaning head with the help
of a dosaging device.
Note
The metering device can be used to add
3% of detergent at maximum. In case of a
higher dose the detergent must be poured
into the fresh water tank.
Place the bottle with the detergent in
the holder behind the operator console.
Close the bottle lid.
Insert the suction hose of the dosaging
equipment into the bottle.
Note
If the fresh water tank is empty, then the
function of adding detergent gets deactivat-
ed. The cleaning head continues to work
without the addition of any liquid. Detergent
addition is also stopped when the detergent
can is empty.
Add the detergent to the fresh water
reservoir.
Adjust the water quantity using the reg-
ulating button according to the dirt on
the floor covering.
Note
Carry out the initial cleaning attempts with
little quantities of water. Increase water
quantity step-by-step until the desired
cleaning result is achieved.
Turn the info button clockwise until "RM
- Dosierung“ or "RM - Dosing" is dis-
played.
Shortly press the info button - display
blinks.
Adjust the detergent dose by turning the
info button (0.5% to 3%).
Press the info button to confirm the set
value.
Note
If no water is to be added to the detergent,
then the dosing must be set to 0%.
Turn the lever downwards; the vacuum
bar is lowered and the suction turbine is
switched on.
Note
For cleaning tiled floors, set the straight
vacuum bar in such a way that cleaning is
done at right angles to the joints.
The inclined position and the inclination of
the vacuum bar can be adjusted to achieve
better suction results (see "Setting the Vac-
uum Bar").
Turn the info button clockwise until
"FACT" is displayed.
Shortly press the info button - display
blinks.
Set the brush speed by turning the info
button.
"...Power" - high speed (100%).
"...Whisper" - medium speed (60%).
"...Fine" - low speed (40%).
Press the info button to confirm the set
value.
Model with dosing equipment "Dose"
Models without dosing equipment Dose
Settings
Setting the water quantity
Adjust detergent dose
Lower the vacuum bar
Setting the brush speed
30 EN

Содержание

Скачать