Moxa TC-6110-T-W7E [60/74] Step 4 reset bios to original state

TC-6110 / Windows 7 System Recovery

6-8

6. Once you have powered down the system and removed the USB drive, you have finished configuring the

recovery environment. The USB drive should be clearly labeled and stored in a safe place. You may now

continue to the next section, where you will return the BIOS to its original state (Step 4) and test the

recovery procedure for successful configuration (Step 5).

Step 4: Reset BIOS to Original State

Now you will need to return the boot priority to its original configuration so that the system will boot from the

original disk. This is done for two reasons; the first is security, so that the machine may not be rebooted from

unauthorized USB drives The second, however, is functional: currently, if the TC-6110 is set to boot from the

USB drive, then the TC-6110 will hang any time a USB data drive (i.e.: non-bootable image) is

inserted in the machine at boot time. The TC-6110 does not currently have the capacity to distinguish

between simple USB data drives and boot-capable OS drives.

1. Reboot the system, and press F2 to enter the BIOS setup menu.

2. Select Hard Disk and shift it to the top boot priority by using the + key, then press Enter. Make sure the

hard disk has first boot priority.

3. Press F10 and then press Enter to save and exit the BIOS settings dialog.

Step 5: Perform a Test Restoration

Connect the USB drive to any of the TC-6110’s USB ports and then reboot the computer. The system will boot

from the USB into the Clonezilla boot loader.

1. Select Clonezilla Live Restore Disk to boot into the system restoration environment.