Moxa TC-6110-CT-LX [51/74] Tc 6110 windows 7 customizable sample code

TC-6110 / Windows 7 Customizable Sample Code

5-7

6. Open the GPS port in the terminal by first setting the COM port to the value you tracked down in step 2

of this section, just above. Next, set the basic communication properties in the Communication

Parameter tab. In the example below we are using the default port for the Moxa GPS module, COM3, at

115,200 baud. You should not need to change the other properties (Data Bits, Parity, etc), but if you do

(perhaps you are using another terminal that requires it) then refer to the figure below for details.

7. Next, open the dialog’s Terminal tab and set the terminal type to ANSI (you may want to increase the

history depth to 500 lines, as well), then click OK to finish the configuration and open the port.

8. At this point, a terminal should open showing GPS data; if not, then you probably need to change the port

(see

step 6, above). Once the data is displayed, you may start writing code for the GPS module.