Moxa TC-6110-CT-W7E [7/7] Configuring the ethernet interface

- 7 -

Audio Input/Output

The TC-6110 Series comes with an audio input/output connector and an

M12 (A-coded, 8-pin, female) connector. Use a cable to connect the audio

input and output. See the following figure and table for pin assignments.

Audio

Line in, right

GND

–

Line in, left

Line out, left

–

Line out, right

GND

Installing the SSD/HDD into the Storage Tray

The TC-6110 computers come with two storage trays that can be installed

with SSD or HDD for storage expansion. Refer to the hardware manual for

detailed description for the installation.

Configuring the Ethernet Interface

Follow these steps to configure the Ethernet interface for a static network

address (begins on next page).

Step 1:

Go to Start  Control Panel  Network and Internet 

Network Connections.

Step 2:

Go to the Local Area Connection tab and click Properties,

then click

Internet Protocol (TCP/IP), and lastly select

Properties.

Step 3:

Click OK after inputting the proper IP address and netmask.

Refer to User’s Manual for additional configuration information.