Moxa V2406-24I-CT-T-LX [47/48] Attention

V2406/2422/2426 Hardware Manual BIOS Setup

4-14

5. Press “+” to move it up to the first priority, and press “Esc” to exit the setup menu.

6. Make sure the first boot device is Hard Disk. If it isn’t, press Enter to change it.

7. Select Exit  Save & Exit Setup and then press Enter.

8. Choose Y to save to the CMOS and then exit.

Step 4: Run awdflash.exe to upgrade the BIOS.

While in the BIOS Setup menu and before upgrading the BIOS, you may choose to save the old BIOS files to a

specific location. Type Y to do so, or N to begin the upgrade.

1. If the BIOS Setup is correct, it will restart and boot from the USB disk.

2. Run awdflash V24001X.SXX from the command line to upgrade the BIOS. Replace xxxxxxx.Sxx with the

BIOS binary file name discussed in Step 2.

3. Press F1 to reset the system after the bios update is complete. The system should reboot at this time.

Note that once the BIOS is successfully upgraded, the default BIOS values will be automatically loaded.

However, if you wish to re-configure the BIOS settings, press DEL while booting.

ATTENTION

NOT switch off the power supply during the BIOS upgrade, since doing so may cau

se the system to crash.