Moxa V2426-T-LX [2/5] Hardware specifications
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa V2426-T-LX [2/5] Hardware specifications

Moxa V2426-LX [2/5] Hardware specifications
2
www.moxa.com
info@moxa.com
Railway Computers
Rear View
Hardware Specifications
Computer
CPU: Intel Atom N270 1.6 GHz processor
System Chipset: Intel 945GSE + ICH7-M
BIOS: 8 Mbit PLCC, with ACPI
FSB: 533 MHz
System Memory: 2 GB capacity, 1 GB (LX and XPE models)/2 GB
(W7E models) pre-installed: 1 slot of 200 pin SO-DIMM SDRAM
Expansion Bus: PCI interface reserved
USB: 3 bootable USB 2.0 ports: 2 type A, 1 M12
OS (pre-installed): Debina 5 (“Lenny”), Windows Embedded Standard
2009, or Windows Embedded Standard 7
Storage
Built-in: 2 GB (LX and XPE models)/8 GB (W7E models) onboard
industrial DOM to store OS
Storage Expansion: 1 type I/II CompactFlash slot for memory
expansion
HDD Support: 1 internal SATA-II bus for mass storage
Expansion Slot: 2 peripheral expansion slots
Other Peripherals
KB/MS: 1 PS/2 interface; supports keyboard and mouse via a Y cable
Audio: Line-in, line-out interface
Display
Graphics Controller: Intel Generation 3.5 Integrated Graphics Engine,
250 MHz core render clock and 200 MHz core display clock at 1.05-V
core voltage
DVI Interface: DVI-I connector (Chrontel CH7307 SDVO to DVI
transmitter), up to 1600 x 1200 resolution
VGA Interface: DB15 female connector, QXGA 2048 x 1536 resolution
Ethernet Interface
LAN: 2 auto-sensing 10/100 Mbps M12 ports
Magnetic Isolation Protection: 1.5 kV
Serial Interface
Serial Standards:
4 RS-232/422/485 ports*, software selectable (DB9 male)
*COM1’s pin 9 signal can be set by jumper as N/C (default), +5 V, or +12 V
ESD Protection: 8 kV for all signals
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction
control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (non-standard baudrates supported;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 6, source type
Input Voltage: 0 to 30 VDC at 25 Hz
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (Source to DI)
Isolation: 3 kV optical isolation
Digital Output
Output Channels: 2, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 VDC
Connector Type: 10 pin screw-fastened Euroblock terminal (6 inputs, 2
outputs, DI Source, GND)
Isolation: 3 kV optical isolation
LEDs
System: Power, Storage
LAN: 2 on each port: 10 Mbps & 100 Mbps
Serial: 2 on each serial port: 1 Tx & 1 Rx
Switches and Buttons
Power Switch: on/off (front panel)
Reset Button: For warm reboot (rear panel)
Physical Characteristics
Housing: Aluminum
Weight: 4 kg
Dimensions:
Without ears: 154 x 250 x 86 mm (6.06 x 9.84 x 3.39 in)
With ears:154 x 275 x 92 mm (6.06 x 10.83 x 3.62 in)
Mounting: DIN rail, wall, VESA
Environmental Limits
Operating Temperature:
Standard models: -25 to 60°C (-13 to 140°F)
Wide temp. models: -40 to 70°C (-40 to 158°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: EN 50155 standard
Anti-shock: EN 50155 standard
Conformal Coating: Available on request
Power Requirements
Input Voltage: 12 to 48 VDC (M12 connector)
Note: Compliant with EN 50155 on 24 VDC
Power Consumption: 48 W
• 4 A @ 12 VDC
• 2 A @ 24 VDC
• 1 A @ 48 VDC
USB 2.0
Host x 2 (type A)
Serial Port x 4
(RS-232/422/485,
DB9 male)
Power Input
(M12)
Serial LED
(Tx/Rx x 4)
DI x 6
DO x 2
Reset Button

Содержание

Похожие устройства

Скачать