M-Audio EQMan Инструкция по эксплуатации онлайн [14/31] 18959

Fig. 3 goes here

EQMan Driver Advanced Setup Dialog Box

The Midi Channel Assignment is used to set the MIDI channel on

which the EQMan operates. To a MIDI application such as a sequencer,

the EQMan looks just like any other MIDI device (i.e., a synthesizer or

drum machine) and responds on its own MIDI channel. The MIDI

channel is important when sending MIDI program change, volume, pan

and continuos controller messages to the EQMan. The default MIDI

channel is 1.

The Hardware Speed is used to tweak the speed at which the computer

sends commands to the EQMan. Some faster machines may require an

additional Delay Factor of 10 or more, but most machines will only

require a Delay Factor of 5 or less. The factory default is 5 and will

work for almost all computers. Keeping the Delay Factor low decreases

the amount of time the computer spends servicing the EQMan, although

there is very little difference between a factor of 2 or 5. If uncertain how

to set this Delay Factor, always error on the high side, i.e., guess high!

You can reduce the factor slowly over a period of time as long as the

card appears to be working properly.

The MIDI Controller Assignments set the MIDI controller numbers that

each band of the EQ will respond to. The MIDI controller numbers 102

through 119 are defined by the MIDI Specification as user-defined and

are therefore good choices for assigning to EQMan EQ bands. Note that

each band may be set to respond to its unique controller number, or

bands may share controller numbers, allowing them to be controlled in

tandem. The factory configuration sets different controller assignments

for each frequency but pairs each left side frequency with its matching

right side frequency. For more information regarding the use of

continuous controllers with EQMan, see the MIDI Control of EQMan

section.