Moxa W406-T-CE [21/24] Sd slot

W321/341 Hardware Setting Up the W321/341

3-6

SD Slot

The W321/341 provides an SD slot for storage expansion. Moxa provides an SD flash disk for plug & play

expansion that allows users to plug in a Secure Digital (SD) memory card compliant with the SD 1.0 standard

for up to 1 GB of additional memory space, or a Secure Digital High Capacity (SDHC) memory card compliant

with the SD 2.0 standard for up to 16 GB of additional memory space. The following steps show you how to

install SD memory card into the W321/341.

W321

The SD slot is located on the right side of the W321 enclosure. To install an SD memory card, you must first

remove the SD slot’s protective cover to access the slot, and then plug the SD memory card directly into the

slot.

The SD memory card will be mounted at /var/sd. Detailed installation instructions are shown below:

Step 1:

Use a screwdriver to remove the

screws holding the SD slot’s outer cover.

Step 2:

After removing the cover, insert the

SD memory card as shown.