M-Audio Delta TDIF Инструкция по эксплуатации онлайн [27/58] 19006

“SP/ANA Ports.” Selecting “S/PDIF” makes the S/PDIF hardware input

the active input. Selecting “Analog” makes the the analog hardware

inputs active. Remember that when S/PDIF is selected as the Input

Audio Source, “S/PDIF In” must be selected as the master clock,

otherwise no signal can be recorded at the S/PDIF input.

“DISABLE CONTROL” CHECKBOX: When running a music program

that utilizes the Delta ASIO drivers, the music program will take control

of some of the Delta Control Panel functions. Checking this checkbox will

“Disable Control of the Monitor Mixer and Patchbay/Router in Audio

Applications,” namely, these ASIO capable applications. Some programs

interpret Direct Monitoring differently, and may result in undesirable

configurations for monitoring.

Emagic’s Logic program, in particular, will switch the Patchbay/Router

into “Monitor Mixer” mode when Logic is switched into record. You may

want to click on this switch when using Logic , thereby disengaging its

control over the Patchbay/Router.

ON THE MAC: The Hardware Settings Page in the Macintosh version of

the Delta Control Panel also contains software switches that allow you to

select which Delta input and output stereo pair will be used by the Sound

Manager, if and when you choose the Delta as the Sound Manager input

and output device. If you go to the Apple menu | Control Panel |Sounds,

and highlight the Delta icon for Sound In and Sound Out, then your

Apple system sounds will be routed to the Delta hardware output that

you have selected here, and Alert Sounds, if you choose to record, will

receive their input from the Delta hardware input that you select here.

You will want to choose the Delta for input and output in the Sound

control panel if your music program does not use ASIO and the Delta

ASIO drivers. If you are using the ASIO drivers (see Mac Software

Installation), then leave the Sound control panel selection to “built-in.”

With the Sound control panel set to built-in, these Sound Manager

settings in the Delta Control Panel will have no effect.

The Sound Manager driver limits you to using only one of the Delta TDIF

stereo input pairs for audio input and only one of the stereo output pairs

for output. These do not need to be matched pairs- you can use inputs

1&2 for Sound In and S/PDIF for Sound Out, for example, or any

combination that you choose. From the Hardware Settings page on the

Mac with the Sound Manager I/O set to “Analog 1&2” for Input and

“Analog 1&2” for Output. Once you have made a selection, go to the File

menu and “Save as Preferences.”