Moxa ioLogik R1210 [4/6] Power and networking

- 4 -

Analog Output

Resolution

12 bits

Output Range

0 to 10 VDC, 4 to 20 mA

Voltage Output

10 mA (Max.)

Accuracy ±0.1% FSR @ 25°C

±0.3% FSR @ -40 and 75°C

Load Resistor

• Internal power: 400 ohms

• External 24V power: 1000 ohms

Installation

Power and Networking

Connect the +12 to +48 VDC power line to the ioLogik R1200’s terminal

block V+ terminal; connect the ground from the power supply to the V-

terminal. Connect the ground pin ( ) if earth ground is available.

NOTE

For safety reasons, the wires attached to the power should be at

least 2 mm (12 gauge) in diameter.

Switch Settings

The R1200 series provides Dual/Rep and Run/Initial switch settings to set

up the communication mode.

Duel (Default)

Dual RS-485 mode

Rep

Repeater mode

Run

User define communication parameters

Initial (Default)

Initial RS-485 communication parameters