Moxa ioLogik E2214-T [115/263] Iologik e2200 series using the web console

Moxa ioLogik E2214-T [115/263] Iologik e2200 series using the web console
ioLogik E2200 Series Using the Web Console
5-13
Channels 8 through 15 are virtual channels. You can click on a virtual channel to configure whether it will return
current averages or deviations for the specified physical channels (TC-00 through TC-07).
System Management
Under system management you can set IP accessibility and SNMP Agent. You can also check your network
connection and do firmware update. Also you Import and Export your system configuration under here too.
1. IP Accessibility
2. SNMP Agent
3. Network Connection
4. Firmware Update
5. Import System Config
6. Export System Config
Accessible IP Settings
On the Accessible IP Settings page, you can control network access to the ioLogik by allowing only specific
IP addresses. When the accessible IP list is enabled, a host’s IP address must be listed in order to obtain access
to the ioLogik.
You can add a specific address or range of addresses by using a combination of IP address and netmask, as
follows:
To allow access to a specific IP address
Enter the IP address in the corresponding field; enter 255.255.255.255 for the netmask
To allow access from hosts on a specific subnet
For both the IP address and netmask, use 0 for the last digit (e.g., 192.168.1.0 and 255.255.255.0).
To allow unrestricted access
Deselect the Enable the accessible IP list option.
The following table shows additional configuration examples.
Allowed Hosts IP address Netmask
Any host Disable Disable
192.168.1.120 192.168.1.120 255.255.255.255
192.168.1.1 to 192.168.1.254 192.168.1.0 255.255.255.0
192.168.0.1 to 192.168.255.254 192.168.0.0 255.255.0.0
192.168.1.1 to 192.168.1.126 192.168.1.0 255.255.255.128
192.168.1.129 to 192.168.1.254 192.168.1.128 255.255.255.128

Содержание

Скачать