Moxa VPort P06-2L80M-CT [65/83] Vport onvif profile s system configuration

VPort ONVIF Profile S System Configuration

4-48

PTZ Camera Drivers

VPort products come with PTZ camera drivers for some of the popular PTZ cameras. Administrators can select

the correct PTZ driver in the “Select the Camera Driver” menu. If the attached PTZ camera is not supported by

the VPort, administrators can use the Custom Camera function to enter the proprietary commands for pan, tilt,

zoom, and focus control.

Setting Description Default

Select the camera

driver

Use the built-in PTZ drivers, including:

1. Custom Camera

2. Pelco D

3. Pelco P

Pelco D

Setting Up a Custom Camera

If the PTZ camera’s driver is not in the list, the administrator can select the custom camera from the Select

Camera driver menu to program the PTZ camera with ASCII code. A custom camera window will pop up when

the Setup Custom Camera button is clicked. Input the ASCII code into this window. Port Settings (Data

bits, Stop bits, and Parity bits) are for the serial communication parameters and Control Settings are for

programming the TILT (Move Up, Move Down), PAN (Move Left, Move right), HOME, ZOOM (Zoom in,

Zoom out), and FOCUS (Focus near, Focus Far) actions.

NOTE

The control protocols are available from the PTZ camera’s supplier. You will need to get the protocols from the

supplier before programming the PTZ camera.

Uploading a PTZ Camera Driver

In addition to the PTZ camera drivers and custom camera functions supported by the VPort, an alternative

user-friendly Upload a PTZ Camera Driver function is available for implementing the PTZ camera control.

Moxa will release new PTZ camera drivers to Moxa’s website as they become available. Administrators can click

on Browse to upload the new PTZ camera drivers to the VPort. In addition, the administrator can also remove

the PTZ driver by selecting the PTZ driver and clicking the Remove Camera Driver button.