Moxa VPort P06-2L80M-CT [7/12] Hardware installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa VPort P06-2L80M-CT [7/12] Hardware installation

Moxa VPort P06-2L80M-CT [7/12] Hardware installation
- 7 -
• Calibration for rotating lens (0 to 360°): Rotate the lens to get
the optimal image. When done, mark the position of this calibration
for future placement or mass installation.
• Calibration for adjusting lens’s vertical position (0 to 90°):
After adjusting the lens’s vertical position, mark the position of this
calibration for future placement or mass installation.
• Calibration for adjusting lens’s horizontal position (±15°):
After adjusting the lens’s horizontal position, mark the position of this
calibration for future placement or mass installation.
Hardware Installation
Step 1: Open and remove the top cover.
Use the torx screwdriver to loosen the top cover screws.
Step 2: Use the markings on the installation sticker to position the drill bit
before drilling holes.
There are 3 types of installation.
a.
Mounting with 4 mounting screws
To mount the camera on the
ceiling, drill a hole through the
gray portion of the sticker and
then mount the camera with the
4 nut/gasket/spring
-washer
sets and the 4 indented
hexagonal head tapping
screws.
b.
Mounting with the side-cable-out adapter
Use the side-cable-out adapter
(VP
-SCO2) if your installation
requires the cable
–out on the
side. Drill a hole through the
blue portion of the sticker for
mounting the adaptor on the
surface with 3 nut/gasket/
spring
-washer sets and
indented hexagonal head
tapping screws. Then, mount
the VPort 06
-2 on the adapter
with 4 M4 screws, which are
provided in the VP
-SCO2’s
package.
VP-SCO2

Содержание

Похожие устройства

Скачать