Moxa VPort 26A-1MP [19/23] Wiring requirements

- 19 -

appear in the green bar near the top of the page. Use this information to

check the system information and installation.

For details of each configuration, check the User’s Manual on the software

CD.

Wiring Requirements

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa

VPort 26A-1MP.

Calculate the maximum possible current in each power wire and

common wire, and observe all electrical codes dictating the

maximum current allowable for each wire size.

If the current goes above the maximum ratings, the wiring could

overheat, causing serious damage to your equipment.

You should also pay attention to the following:

• Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

• You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

• Keep input wiring and output wiring separated.

• We strongly advise labeling the wiring to all devices in the system

when appropriate.

WARNING

his equipment is intended to be used in a Restricted Access

Location.