Moxa VPort 36-1MP-T [47/78] Vport 36 1mp system configuration
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa VPort 36-1MP-T [47/78] Vport 36 1mp system configuration

Moxa VPort 36-1MP [47/78] Vport 36 1mp system configuration
VPort 36-1MP System Configuration
4-26
Environment
Setting Description Default
Environment Choose what kind of environment the VPort camera will be installed
in;
optimized parameters will be applied to best fit your choice.
Outdoor
Image Adjustment
Setting Description Default
Saturation Tune the image attribute to a value between -4 and +6 0
Contrast & Sharpness Tune the image attribute to a value between -4 and + 4 0
Auto Gain Control
(AGC)
The AGC function provides a clear image in low light conditions by
controlling an amplifier that is used to boost the video signal when the
light dims so as to increase the camera’s sensitivity. In some bright
environments, the amplifier may be overloaded, which could distort
the video signal. In this case, it is necessary to monitor the signal level
with the AGC control circuit and AGC may need to be switched off.
16x
Black Level Control
(BLC)
This function changes the black level of the image. Higher settings
will
make the image brighter, and lower settings will make the image
darker.
Off
AWB
(Auto White Balance)
In most conditions you should choose ATW, which allows the camera to
automatically adjust the white balance. AWB is recommended when
your camera is focused on a scene in which one color occupies most of
the view.
Take these steps to use AWB:
1.
Focus the camera on a white color in an actual environment with
normal lighting.
2. Select AWB and then press Save.
3. Move the camera back to the scene that will be monitored.
ATW
Appearance Normal: Normal view
Mirror: Image will be displayed as in a mirror
Flip: 180 degree rotation followed by a mirrored display
180 degree rotation: Image is rotated 180 degrees
Normal
Digital Noise Reduction
Setting Description Default
Enable Enable the digital noise reduction function Off
Day / Night
Setting Description Default
Day Manually set the camera to day mode (color mode) checked
Night Manually set the camera to night mode (monochrome mode) Unchecked
Light Sensor The camera light sensor will switch between day and night modes
based on the ambient illumination level.
Set duration (in sec.) to define how long the illumination level should
persist before switching modes.
Unchecked
DI Control Switch day/night when by DI
• High Low Switch: The camera will force a day/night switch
whenever the DI status changes.
• Pull High: The camera will force a day/night switch whenever the
DI status is high.
• Pull Low: The camera will force a day/night switch whenever the
DI
status is low.
unchecked
Trigger relay output
when day/night mode
switches
Triggers relay output when day/night mode switches; the
relay status
for day/night mode can be configured separately.
unchecked

Содержание

Похожие устройства

Скачать