Moxa VPort 36-1MP-IVA-T Руководство по аппаратной части онлайн [5/13] 171702

- 5 -

• Auto Iris Socket: Plug the auto-iris cable from camera lens into this

socket to use the auto-iris function.

• Lens Holder: The lens holder is designed for CS mount lenses; a C/CS

adaptor must be used to mount C lenses. For details, see the HW

installation section of this manual.

• SD Card Slot: Remove the SD card slot cover and insert an SD card

for disconnection/event local storage.

• Mounting Bracket Screw Holes: For fastening mounting brackets.

• Reset Button: Use a pointed object to push in the reset button to

reboot. Push and hold the button until the system reboots to restore

factory defaults.

Back Panel View

1. 5-pin terminal block for DI and relay connection

2. 2-pin terminal block for RS-485 pin connection

3. RJ45 port for PoE/non-PoE connection

4. Ground screw for connecting a grounding wire

5. 3-pin terminal block for power input

6. LED indicator to show network and system status. Green indicates

normal operation.

7. LED indicator to show power status. Green indicates normal

operation.

NOTE

The VPort 36-1MP can be powered by a 12-32 VDC or 18-30 VAC

power input

, or Power over Ethernet (PoE, 802.3af). For power

redundancy, use DC or AC power together with PoE.