Moxa VPort 36-2L2X-T [9/9] Safety first

- 9 -

Wiring Requirements

SAFETY FIRST!

•

Be sure to disconnect the power cord before installing and/or

wiring your Moxa VPort 36-2L.

•

Calculate the maximum possible current in

each power wire

and common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size.

•

If the current goes above the maximum ratings, the wiring

could overheat, causing serious damage to your equipment.

You should also pay attention to the following:

• Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

• You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

• Keep input wiring and output wiring separated.

• It is strongly advised that you label wiring to all devices in the system

when necessary.

NOTE

• This equipment is intended for use in locations with restricted

access such as computer rooms. Access to the equipment

should be restricted to SERVICE PERSONS or USERS who are

trained and

authorized to use this equipment. Furthermore,

access to the equipment should be restricted by the use of a

key, or a user identification system. Only authorized,

well-trained professionals should be given access to the

restricted area where the equipment is in operation.

•

External metal parts are HOT!!

Personnel who have access to this equipment should be

made aware of the hot surface of the equipment. They must

not touch the metal chassis of the equipment without proper

protection.