Moxa VPort 36-2L3X [3/9] Product description

- 3 -

• Minimum illumination up to 0.2 lux (color) and 0.1 lux (B/W)

• Built-in tamper alarm and Video Motion Detection (VMD)

• -40 to 75°C operating temperature

• 1 10/100BaseT(X) port with RJ45 connector

• SDXC slot for local event / disconnected recording

• CBR Pro for flexible flow control

• DynaStream™ for network efficiency with dynamic frame rate change

• EN50121-4 compliance

• Supports ONVIF Profile S for multiple video stream profiles

• 12/24 VDC, 24 VAC, or PoE redundant power inputs

• CE, FCC, UL 60950-1

• EN 50121-4, NEMA TS2 compliance

• Pre, Trigger, and post snapshot images supported

• Sequential snapshot images supported

• Supports SMTP and FTP for alarm message transmission

• Supports HTTP event server

• 5-year warranty (limited warranty on moving parts; see Moxa’s

online warranty policy for more details)

Product Description

Front and Top Panels

• SD Card Socket: The VPort supports the SDXC interface, which can

use SD cards with more than 64 GB of memory for local storage of

video recordings (by event or disconnection recording).

• Mounting Bracket Screw Hole: Screw holes for fastening the

camera to a protective housing.

• Reset Button:

 Factory default: Press and hold the button for at least 60

seconds, until the STAT LED turns green. Configuring the factory

defaults should take about 90 seconds.

 Reboot: Press and hold the button for at least 30 seconds until

the STAT LED flashes red. At this point, the VPort will initiate the

reboot process.

• Light Sensor: there is a light sensor beside the lens, which is to

detect the luminance to decide the camera's day and night control.

• Motorized P-IRIS lens: VPort 35-2L is built-in with a motorized

P-IRIS lens, which can remotely control the zoom and focus. With this

feature, there is no need to fine-tune the lens at the field site saving

time and costs.