Moxa VPort P06-1MP-M12-CAM42 [28/83] Firmware upgrade

VPort ONVIF Profile S System Configuration

4-11

LED Control (not supported by all VPorts)

Setting Description Default

Turn on/off physical

LED

Turn on or off physical LED On

System I/O (not supported by all VPorts)

The status of the digital input is shown under Digital Input 1, as shown below.

The status of the relay output is shown under Relay Output 1, as shown below.

Setting Description Default

Idle State Set the signal type to inactive Close

Switch Mode Bitstable mode: Will remain stable after being activated

Monostable mode: The signal state will return to inactive state

after waiting for a preset period of time (Delay Seconds).

Bitstable

Delay Seconds When in Monostable mode, the signal state

will switch back to

inactive state after this amount of time has elapsed;

the delay

time will be reset.

Firmware Upgrade

Take the following steps to upgrade the firmware:

Step 1: Press the Browse button to select the firmware file.

Step 2: Click on the Upgrade button to upload the firmware to the VPort.

Step 3: The system will start the firmware upgrade process.

Step 4: Once Success …..Step 3/3 : System reboot is displayed, wait 30 seconds for the VPort to reboot.

NOTE

For the VPort, the firmware file extension should be .

rom.