Moxa VPort P06-1MP-M12-CAM60 [6/15] Hardware installation

- 6 -

• Calibration for rotating lens (0 to 360°): Rotate the lens to get

the optimal image. When done, mark the position of this calibration

for future placement or mass installation.

• Calibration for tuning lens’s vertical position (0 to 90°): After

tuning the lens’s vertical position, mark the position of this calibration

for future placement or mass installation.

• Calibration for tuning lens’s horizontal position (

±30°): After

tuning the lens’s horizontal position, mark the position of this

calibration for future placement or mass installation.

Hardware Installation

Step 1: Open and remove the top cover.

Use the torx screwdriver to loosen the top cover screws.

Step 2: Use the installation sticker for drilling the holes. There

are 3 types of installation.

Mounting with 4 mounting screws

Drill the gray hole in the sticker, and then mount the camera with the

4 nut/gasket/spring

-washer sets and 4 indented hexagonal head

tapping screws for mounting the camera on the ceiling.

Mounting with the side-cable-out adaptor

Use the side-cable-out adaptor

(VP

-SCO1) if your installation

requires the cable

–out on the

side. Drill the blue hole on the

sticker for mounting the

adaptor on the surface with 3

nut/gasket/spring

washer sets

and indented hexagonal head

tapping screws. Then, mount

VP-SCO1