Moxa VPort P06-1MP-M12-MIC-CAM36-CT-T [14/65] Step 1 configure the vport p06 1mp m12 s ip address

VPort P06-1MP-M12 Getting Started

2-4

Step 3: Connect the camera with 4-pin M12 D-code Ethernet connector and RCA male connector.

Step 4: Loosen the thumb screw for tuning the horizontal, vertical, and rotating lens position. Once

the lens position is correct, fix this thumb screw.

Step 5: Fix the top cover. The installation is now complete.

Software Installation

Step 1: Configure the VPort P06-1MP-M12’s IP address

When the VPort P06-1MP-M12 is first powered on, the POST (Power On Self Test) will run for a few moments

(about 30 seconds). The network environment determines how the IP address is assigned.

Network Environment with DHCP Server

For this network environment, the unit’s IP address will be assigned by the network’s DHCP server. Refer to the

DHCP server’s IP address table to determine the unit’s assigned IP address. You may also use the Moxa VPort

and Ether Device Configurator Utility (edscfgui.exe), as described below:

Using the Moxa VPort and EtherDevice Configurator Utility (edscfgui.exe)

1. Run the edscfgui.exe program to search for the VPort. After the utility’s window opens, you may also click

on the Search button to initiate a search.