Moxa VPort 461A [29/35] Camctrl
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa VPort 461A [29/35] Camctrl

Moxa VPort 364A-S-SC [29/35] Camctrl
VPort CGI Commands VPort Set/Get Configuration CGI URL and Parameter Items
2-24
6: Cohu
controlmode G/S 0: Transparent PTZ Control
1: Specific PTZ Driver
PTZ control mode.
speedlinkname01 to
speedlinkname24
Max. 8 char (BasicString) User defined command name.
These commands can be used for
extended PTZ control.
speedlinkcmd01 to
speedlinkcmd24
Max. 60 char (CustCamString) User defined string pattern for
command instruction
customcmd01 to
customcmd10
Max. 60 char (CustCamString) 01: “Up” command
02: “Down” command
03: “Left” command
04: “Right” command
05: “Zoom In” command
06: “Zoom Out” command
07: “Focus Near” command
08: “Focus Far” command
09: “Home” command
10: “Stop” command
Note: If PTZ driver=2 (Custom
Camera), the VPort will use these
commands.
camctrl
This parameter is used in 1-channel video servers for interacting with the PTZ camera through the serial bus.
Item Action Value Description
presetname01 to
presetname20
G Max 60 char Name of preset position of camera
control
Camid G/S 0 to 255 PTZ camera ID (or address)
uartport G/S 0: PTZ port
1: COM port
Serial interface.
Note: Only applicable in models with
two serial interfaces
camctrl##
This section applies to 4-channel video encoders; “##” indicates the channel number of the video encoder
(01/02/03/04). For example, camctrl04_camid indicates the PTZ camera ID of channel 4.
Item Action Value Description
presetname01 to
presetname20
G Max. 60 char Name of preset position of camera
control
camid G/S 0 to 255 PTZ camera ID (or address)
uartport G/S 0: PTZ port
1: COM port
Serial interface.
Note: Only supports models with 2
serial interfaces.

Содержание

Похожие устройства

Скачать