Moxa VPort 461A-T [11/88] Product description

Moxa VPort 364A-S-SC-T [11/88] Product description
VPort 364A Introduction
2-7
Product Description
BNC video input
The BNC video input is a 1Vpp, 75-ohm video port for connecting an external camera. To ensure that the
correct video modulation type is detected, the cameras should be connected and powered on before the VPort
is powered on.
NOTE
Please use a standard CCTV
cable (RG59U or above) to connect the video camera to the VPort’s BNC connector.
RCA Connectors for Audio Input/Output
The VPort 364A has 2 RCA phone jacks for audio input and output on the front panel. One jack is for a
MIC-in/Line-in audio input connection, which can be directly connected with a microphone or an audio source
from an amplifier. The other jack is a Line-out audio output connection, which can be used to connect
earphones or an amplifier.
LED indicators
The front panel of the VPort 364A contains several LED indicators. The function of each LED is described in the
table below.
LED Color State Description
STAT Green/Red Steady Red Hardware initialization stage.
Flashing Red Software initialization stage.
Steady Green System has booted up and is ready to run.
Flashing
Green
Firmware is being upgraded.
PWR1 AMBER On Power is being supplied through power input PWR1.
Off Power is not being supplied through power input PWR1.
PWR2 AMBER On Power is being supplied through power input PWR2.
Off Power is not being supplied through power input PWR2.
FAULT RED On One of the following 3 conditions is met:
One of the 2 power inputs is disconnected.
Video loss.
Network disconnected.
Users can configure these alarm settings on the system
alarm page of system configuration.
Off Both power inputs are connected and are working properly,
there is no video loss and the network is connected.
V1
V2
V3
V4
GREEN On Video signal is detected
Off Video signal is not detected
10/100 AMBER On 10 Mbps link is active
Blinking Data is being transmitted at 10 Mbps
Off 10 Mbps link is inactive
GREEN On 100 Mbps link is active
Blinking Data is being transmitted at 100 Mbps
Off 100 Mbps link is inactive

Содержание

Скачать