Polaris PRE R 0920 [13/16] Before the first use

Before the first use

Get the radiator out of the box and place it on the foam plastic cover. Make sure whether the power

cable and the device were not damaged during the transportation.

Assembly instruction

• The roller-legs should be installed before operating the radiator.

• Turn over the radiator to have access to bottom panel. Make sure that the device is on a flat

surface and there is nothing to scratch the surface of radiator.

• Put the wheels assemblies onto the radiator by placing the U-shaped bolts between the outermost

fins on each side of the radiator. If the radiator has 7 or 9 fins, install the wheels plate between

first and second fin each side, as shown at figure 1

• Securely fasten the wheels assemblies onto the radiator by screwing the wing nuts onto the bolts.

• Turn over the radiator in normal position and put it in vertical position.

Warning! Please operate the radiator in normal vertical position. Any other position can

create a hazardous situation.

Wheels installation

Attention! The radiator should always be placed in vertical position to reduce the risk of

overheating, fire or electric shock.

Operation of the appliance

Make sure that the radiator is placed in vertical position to reduce the risk of overheating, fire

or electric shock.

Don’t switch on the appliance in case it is damaged

• Before plugging the device in power socket, please make sure, that the power control is in the

OFF position and the thermostat control in the LOW (MIN) position.

• Press the power switch buttons to the relevant necessary position:

only button I is pressed – low power

only button II is pressed – medium power

both buttons are pressed (III position) – high power mode.

Fig. 1

Fig. 2

Документ создан с помощью незарегистрированной версии pdfFactory Pro www.pdffactory.com